Who does carbon fiber fabrication?
#11
Platinum Member
Platinum Member
Join Date: Apr 2001
Location: Beautiful Fort Lauderdale www.cheetahcat.com
Posts: 10,833
Likes: 0
Received 6 Likes
on
6 Posts
You need enough epoxy left to glue one filament to another anything more is going along for the ride and NOT paying, these vise like pressures with the high curing heat give the best possible Physicals and yes it can be overdone. I had some carbon control surfaces from a fighter jet and they were impressive when looking at a cut edge and the zillion tiny compressed layers of material in there.
#13
Gino, try Robson they make custom CF parts for Lamborghini's http://www.robson-design.com/about.htm Also if you're not set on the SV wing contact SP Engineering for a really nice CF LP wing pic bellow,
http://www.sp-power.com/
I looked at your LP, nice choice. I'm going to go with the monterey blue. Good luck
http://www.sp-power.com/
I looked at your LP, nice choice. I'm going to go with the monterey blue. Good luck
Last edited by C5Steve; 01-26-2010 at 12:27 PM.
#14
Registered
Join Date: Dec 2000
Location: Bell Canyon, CA
Posts: 12,754
Likes: 0
Received 0 Likes
on
0 Posts
#15
Registered
I forget what the limit is there but I remember riding in your 39 MTI at 140 mph testing with you and Larry. And we got stopped by the patrol (only because we were stopped) and they let you off. I thought for sure your going to jail for those speeds.
#18
21 and 42 footers
Platinum Member
hey Gino....is this really all your chit?!?!?!?!?
I recognize the boat in the background.
www.speedwake.com/forums/showthread.php?t=64063
I recognize the boat in the background.
www.speedwake.com/forums/showthread.php?t=64063
#20
Registered
Join Date: Dec 2000
Location: Cudjoe Key, FL USA
Posts: 961
Likes: 0
Received 0 Likes
on
0 Posts
http://www.dragonplate.com/
This is a friend's company who does a lot of aviation stuff. Not sure if he could help or not, but might be worth a look.
This is a friend's company who does a lot of aviation stuff. Not sure if he could help or not, but might be worth a look.