I think I have a parts breakdown for them, will check when I get to the office..

That would be great Scott. They sure are proud of the parts on those things! They get I think it was 25 bucks a bolt for those things! The threaded rods that hold the glass up they show as over 100 bucks..

Working on it now. Requested a breakdown on the first unit linked to, in a 1.25" size. Breakdown on Perko's site only lists the basics, handle, sleeve etc. I'll post what I get.

Audio, yours the same style? If not, go to Perko.com, type strainer in search and let me kow which one you have please.

6" top to bottom
-Mike

I have a PDF file with some parts infor covering the 4 and 500 series, can't post it here nor on photobucket. Emailable, ping me an email addy and I'll send it over...

madpoodle

aol
dot
com

pdf file
 

Would you e-mail it to me too at [email protected]
I have to replace my strainers.
Thanks,
Billy Frenz

I need the threaded rod.

Let me know

[email protected]

Brochure sent. Jon, I thought I had your email addy but don't apparently..

The one that I need is 6" from top to the start of the threads.

Mine is 6"'s from the the bottom to the top of the thread.
-Mikes