Looking for 2" rigging hose for outboards
03-08-2011 | 07:24 AM
#1
Thread Starter
OSO Moderator
Joined: Oct 2000
Posts: 3,580
Likes: 6
From: Virginia Beach, VA
Looking for 2" rigging hose for outboards
I am looking for about 8' of black 2" rigging hose. This is the tube that covers all the wires/cables that go to the outboard motor.
I have found some in a kit with a flange: http://www.thmarine.com/product.cfm?PRID=103l
But I only need the hose - and I need it by the weekend.
Where can I get it?
Thanks in advance!
I have found some in a kit with a flange: http://www.thmarine.com/product.cfm?PRID=103l
But I only need the hose - and I need it by the weekend.
Where can I get it?
Thanks in advance!
__________________
BillR
'00 Scarab Sport 302 CC
'02 Cigarette Top Gun TS
'02 PQ 340
'00 PQ 280
'98 Scarab 22
'97 Baja Outlaw 20
'72 Checkmate
'65 Glastron
BillR
'00 Scarab Sport 302 CC
'02 Cigarette Top Gun TS
'02 PQ 340
'00 PQ 280
'98 Scarab 22
'97 Baja Outlaw 20
'72 Checkmate
'65 Glastron
03-08-2011 | 07:31 AM
#2
Registered
Joined: Aug 2003
Posts: 7,392
Likes: 1
From: Boca Raton
Not sure where to get it by the weekend, I have heard of people using vacuum cleaner hose for a shop vac, works good, but wont last forever, not left in the sun anyway.
http://www.mcmaster.com/#suction-duct/=bcdgvn
http://www.mcmaster.com/#suction-duct/=bcdgvn
03-08-2011 | 07:51 AM
#4
Registered
Joined: Feb 2004
Posts: 12
Likes: 0
03-08-2011 | 02:56 PM
#7
Registered
Joined: Dec 2010
Posts: 19
Likes: 0
From: Silverdale,WA
Home Depot or Lowes, You can use shop vac hose but it is usually not enough. Go to the submersible/sump pump area and get a replacement hose. Comes in 15 or 20 ft sections and it's cheaper than the shop vac stuff.
