Fundeck from mold to completion
07-28-2011 | 06:46 PM
#11
Registered
Joined: Apr 2005
Posts: 470
Likes: 0
From: LITCHFIELD,IL.
You would never want to spray onto the hull, it's far more permanent and advantageous to do it all in the mold if you have the capability to. Essentially comparing gelcoat to spray paint is like concrete to blacktop. Make sense?
Hope you all are still enjoying the updates, I personally think this is a fascinating part of the process. Here some more pics!
Hope you all are still enjoying the updates, I personally think this is a fascinating part of the process. Here some more pics!
08-02-2011 | 12:54 PM
#13
Thread Starter
Banned
Joined: Jun 2011
Posts: 72
Likes: 0
Been absent a couple of days so here's a few updates on our favorite boat with a welcome surprise at the end 
I tried to get in close enough here so you can make out the detail of this process.
And here is what the bottom design looks like out of the mold.
I tried to get in close enough here so you can make out the detail of this process.
And here is what the bottom design looks like out of the mold.
