In case Merc 1075's arent enough.....
#1
Registered
Thread Starter
Join Date: Jul 2006
Location: Oshawa, Ontario, Canada
Posts: 2,034
Likes: 0
Received 1 Like
on
1 Post
In case Merc 1075's arent enough.....
Imagine what a PAIR of these would sound like idling through open exhaust....
http://www.sonnysracingengines.com/e...p-new-for-2011
http://www.sonnysracingengines.com/e...p-new-for-2011
#6
Registered
Thread Starter
Join Date: Jul 2006
Location: Oshawa, Ontario, Canada
Posts: 2,034
Likes: 0
Received 1 Like
on
1 Post
I heard WELL North o 100k, Sonnys builds drag and Marine motors. I would have him build a pair with 8:1 compression and a hyraulic roller shaft, would still probably make INSANE hp and would live forever. I think EFI would a good idea too, IF I had the money!
If I win the powerball I will let you guys know how it turns out, lol
Mike
If I win the powerball I will let you guys know how it turns out, lol
Mike
#7
Registered
Join Date: Apr 2009
Location: Denmark and hopefully some place nice
Posts: 1,852
Likes: 0
Received 1 Like
on
1 Post
I heard WELL North o 100k, Sonnys builds drag and Marine motors. I would have him build a pair with 8:1 compression and a hyraulic roller shaft, would still probably make INSANE hp and would live forever. I think EFI would a good idea too, IF I had the money!
If I win the powerball I will let you guys know how it turns out, lol
Mike
If I win the powerball I will let you guys know how it turns out, lol
Mike
#9
Registered
Thread Starter
Join Date: Jul 2006
Location: Oshawa, Ontario, Canada
Posts: 2,034
Likes: 0
Received 1 Like
on
1 Post
Yep, he already HAS built several motors with that exact combo, The last one I saw was a 794 with low compression and Whippled/EFI setup, really sweet combo. He is mainly know for Drag motors, and builds some of the best, along with Fulton and Kaase. But, his marine stuff rocks too!