duramax swap?
#152
Thread Starter
Registered

Joined: Mar 2010
Posts: 1,821
Likes: 6
From: morehead n.c
#153
Registered
Joined: Mar 2002
Posts: 2,142
Likes: 3
From: Miami Beach
#154
Thread Starter
Registered

Joined: Mar 2010
Posts: 1,821
Likes: 6
From: morehead n.c
#155
Registered
Joined: Mar 2002
Posts: 2,142
Likes: 3
From: Miami Beach
is it still AWD or can you switch between 2wd and 4wd? if you are spinning all 4 in 2nd and 3rd gears sounds like you need stickier tires! I have an S65, 600hp and 738 ft-lbs, and it hooks up after 1st gear unless its wet. You should get that thing to the nearest 1/4 mile track and see what it can do sounds like a fun package.
#156
Thread Starter
Registered

Joined: Mar 2010
Posts: 1,821
Likes: 6
From: morehead n.c
is it still AWD or can you switch between 2wd and 4wd? if you are spinning all 4 in 2nd and 3rd gears sounds like you need stickier tires! I have an S65, 600hp and 738 ft-lbs, and it hooks up after 1st gear unless its wet. You should get that thing to the nearest 1/4 mile track and see what it can do sounds like a fun package.
#158
Thread Starter
Registered

Joined: Mar 2010
Posts: 1,821
Likes: 6
From: morehead n.c
#159
Registered
Joined: Feb 2012
Posts: 33
Likes: 0
From: misplaced Idahoan stuck in Albuquerque, Roughneckin on RIG 41
I used to work for Predator Motorsports. For a short time we had a guy in Kansas doing the swaps but there were some issues and we started doing them in house. Ryan (Predator owner) is a great guy. His whole family is. Hope you like it. there are tons of things in the diesel world you can do to that monster. have not read all of the posts but what model engine did you go with? hope not a LB7. injector nightmare motor. LLY was a good motor but had over heating issues. LMM and LBZ are the target ones to have. just get rid of the EGR crap and you will be golden.



