The Boat and Rigging look excellent, It's been a pleasure racing and getting to know Jay this season, I know you guy's will do great, best of luck hope you make it to Savanna.

Eddie Simmons
SuperboatUSA.com F1-68

GPS SPEEDOMETER!
 

Hey Yahoo,
Our good friends at Livorsi Marine supplied all of the RUGGED
Gaffrig gauges. The speedometer that you are questioning is
a new high tech unit that gets it's info from a GPS reciever on
the deck. No pitot tube or water pressure hose needed.
Sounds like you have been out of the loop! :D

since im out of the loop, you might want to purchase the tachs that you really need. The ones that dont really start measuring RPM till 4 or 5k RPM.

Just a thought since we dont race at 2k.

Sorry about the speedo, do you have a slave on the driver side ?

Curtis

also as a side note, the drive indicators need to be in the middle of the dash at the very top. These are very important for the throttleman. He should not have to look down and to the left to see where his drives and tabs are.

Curtis

OH S**T
 

Someone better get the popcorn and brew!!

THIS ONE'S GOING TO GET INTERESTING!!

Hey Yahoo,
To each there own, Everybody has different ideas some good some bad. Grant decided to lay out the dash his way. When you build another one you can lay it out in the fashion you like. :D

good point, good luck with the new boat.

With the sparco seats, you may want to put a layer of super dense foam between the seats and the boat. It will help with the vibration, and big bumps.

Hey Yahoo!
Thanks for the propeller offer! I will let the powers at be know
about them. If you have any other things that might be of interest to us don't hesitate to let us know!:D We are also having a OSO VIP stop by tommorrow to check out this bad ride.

Jeffery stopped by Friday, his buddy Nort was nowhere to be
found. Heard he had a crazy night in So Flo! Second engine
was dynoed yesterday. both will be installed pretty soon. Grant
should have tabs installed for some more picts! :cool:

Great job guys!I'm looking forward to seeing you.

Grant is on his 18th 10 hour day straight!
Zero Drag crash boxes showed up yesterday,headers today.
Looks like Ken's Super Cat engine fits just right in the bilge.
The great guy's at Motion were putting some finishing touches
on the canopy lid and windshield.
:cool:

HEY TOO OLD!
SEE YA IN SAVANNAH! :D

No headers today, C.M.I. is dropping the ball:(

Hey CAT!
You crack me up! LOL! I'll get Ken from Fluke Performance to sit
down with you sometime and fill you in on all of his induction
secrets.
:D

Hey yahoo, alot of bold statements for someone selling it all and getting out of supercatLITE! I know it was a tragedy at Corpus Christi but if you love the sport you continue on. What are your intentions now, to us it sounds like you should be rigging this one and in the hot seat.

Goodfella- best of luck with the boat, some of us dreaming that we could be in a motion 40 let alone nit picking someones hard work and time.

You need a lot bigger engines, there is too much wasted space in e engine hold.

Hey Goody76!
Thanks for the positive feedback!
vonwolske, I think you need to take a look at APBA's
rule book and see that we are only allowed a certian
size engine and induction system in Super Cat class.
Also the engines will look alot BIGGER once we install the C.M.I. exhaust system if we ever get it.:cool:

super cat
 

Looks great hope to see you at the race with the new boat.Hope all goes well it's 5:30 am and my day is going to be a long one work all day drive all night sleep?????

good luck Rob
Out For Justice P1-4

I went to Dollar Offshore and saw this Cat myself. She is a beauty.
Everyone over at Dollar is doing a great job and what a bunch of nice professional group of people!!

Rob, I know how you feel , I will be working all night till 5am and then driving straight to Savannah on absoulty no sleep either. I can't wait to see The Out for Justice gang again!!!:D Shall we tear it up again like we did in Marathon!!:eek: ;)

Good looking equiptment..
 

Very nice, goes with saying "clean enough to eat off the floor!"
Too old, looks like you are really taking your time and doing it right!!Think you should be very proud!! Keep us posted on your progress...

eliminator219

Hey Rob,Bat,Too Old.
Thanks for all the support but as of right now I think J.E.M. Motorsports
is staying at Doller for the weekend :( C.M.I. dropped the ball and didn't get our headers to us on time. Eliminator219, Too Old is our threadmaster for this project. The man behind the rigging and set up is Grant Bruggerman and the engine builder is Ken Fluke@Fluke Performance. The owners of this BAD RIDE are Jay and Bob Muller.

Goodfella, I am just jerking your chain. I am aware of the motor size limitations.

Lots of room would be nice to fill it with more mega power.

Hey Von,
NO SWEAT! :D

Awesome rig job Good Luck!;)

THANKS BEAK!:D

I cant look at these pics too often......it would waste too much kleenex!:D :D :D :eek: :eek:

Grant took a well deserved break last weekend and Crewed with
Snack Attack. Well 1/2 of my C.M.I. header order showed up today, was promised July the 1st. Will have some more picts
hopefully next one with the rig on the hose testing systems.
:D

Sorry for slackin, Phones ringing of the hook! Have new picts
tommorrow! :cool:

new pic's
 

Here's the latest...I hope. If this does not work, I will be shipping them to you, TOO OLD. Hey, I never got to buy you that drink in Savannah, I owe you!

another one..
 

here's another pic. Goodfella will fill you in later!

The boat is 90% done need to install tailpipes on Monday. Cut
holes in engine hatch and then finally run this bad boy on the hose! Check all systems adjust linkages Etc. Ryan Beckley will be in town this week to put some color on the hullsides. Jay and
Bob will be in town on Wedsnday for sea trial.

SPONSORSHIP INQUERIES ARE GLADLEY ACCEPTED

Jay..
 

..got to spend some time with Jay, today at the NJPPC Radar Shoot...sounds like they're ready to go for Cleveland!!

Lotsa Luck!!

:cool:

I ve never seen /heard /dreamed such a rig job!!!
if this boat was mine I would watch these detailed work and drink Jack instead of driving it.

-just to get some idea : is this job done by owner as hobby or are companies doing this much detailed work to customers?

how long does it take to finish this job?
how much does this rigging costs?if its done by a rig shop?(parts+labor?)


WAOV-WAOV-WAOV!!!!!!

Too Old..
 

..you missed another great Jersey event today!..NJPPC Radar Shoot..wow!!

Phillip, Shane, etc..etc....great day! :D

BTW..did you see Ron P's post regarding Jet Set?!?!?!

..I only experienced 185mph!!

:cool:

Too Old: istanbul

Rigging Pro
 

Hey timucin,
The gentlemen that is doing this fine work is
GRANT BRUGGERMAN .
He is a stickler for detail. Both owners of the boat
Jay & Bob Muller wanted the best job for the best
price. I think they made a very wise choice in choosing
Grant. I will post the actual amount of man hours it took
and an amount that Grant charged. Grant thanks you for
the positive feedback on his work. :D

Curious, why did you go with the pipes out the top ?

BODYSHOT1,
Hi Marty, I bet you are still in awe, Do you and RonP realize you guys, and a few State Police just went for a pleasure ride that duplicated a record setting run? What a blast. And as Ronp said, most people can only go this fast in a plane. When you tell people you went 190 or 195 in a offshore boat the answer is yea sure, do you want to buy a bridge? But I saw your smiles, they were unforgettable. Great to see you.
Philip

Hey Curtis,
Save on wieght of tailpipes and these headers sound awesome.
Also keeps the engine room less cluttered.:cool:

Phillip,

Great to see you as well...and you're right..it was awesome!!..and something I'll never forget!!

Take care...

Marty

:cool: