Winter upgrades/projects, let's her them!
#31
Can You Hear Me Now??
Gold Member
Repaint dash panels and bolster bases. Dropped my 675 Keith Eickerts off at Richie Zuls for a frshen and bump up. New header and tail pipes and a few odds and ends....
#35
Registered
I would (along with a host of some AO and Awesome owners) interested in your cabin door project. Go over to either the AO or Awesome thread and let us know what you find or build.
#36
Registered
#39
Registered
I switched from stock cast iron manifolds to Revolution Marine alum manifolds in my twin sbc set up and and saved 240lbs in total.....each complete stock iron manifold and riser weighed 85lbs !, each complete Rev Marine mani/riser weighed 25 lbs.
back of the boat went up about an inch
back of the boat went up about an inch
#40
Registered
iTrader: (5)
Convert the first 38 Donzi ZRC ever made (hull #001) from a side-by-side bravo set up to a staggered Arneson Asd-7 set up powered by Ilmor 710's. Also do some cosmetic changes as well. Follow updates in the Donzi section.
http://www.offshoreonly.com/forums/d...posit-zrc.html
http://www.offshoreonly.com/forums/d...posit-zrc.html
Last edited by ridefast77; 12-23-2011 at 08:05 AM.