Precision Marine la
12-18-2012 | 09:06 PM
#2
VIP Member
Joined: Apr 2001
Posts: 4,213
Likes: 0
From: Chicago il
Mark is one of 2 guys in the U.S. that I would have any kind of work done on my motors. Mark did the tune on my motors. I crated them up in Chicago, sent them down and got them back, put them in the boat and they run perfect. The tune is right and he got 50 more HP than I expected. He asks a lot of questions about your setup, so be prepared to answer him.
As you can see below, I personally endorse him.
The other guy I would have no problem recommending is Eddie Young at Young performance. He is very good also.
Good Luck.
Smitty
As you can see below, I personally endorse him.
The other guy I would have no problem recommending is Eddie Young at Young performance. He is very good also.
Good Luck.
Smitty
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
12-18-2012 | 09:12 PM
#3
Platinum Member
Joined: May 2003
Posts: 667
Likes: 0
From: Metairie, La.
I have had them do all of my major engine work and have had nothing but good things to say.
If you are looking for a great EFI motor they can do it. When you get your motor and their dyno says it made XXXXhp you can bet it did, and will when it's back in the boat.
If you are looking for a great EFI motor they can do it. When you get your motor and their dyno says it made XXXXhp you can bet it did, and will when it's back in the boat.
12-19-2012 | 08:25 AM
#7
Registered
Joined: Aug 2006
Posts: 1,126
Likes: 0
From: Dallas Ga
Mark is doing my motor right now. He is the best and that is why it is there. Your biggest problem is going to be getting him to do the work, last time I looked he was booked thru the winter. He is a very popular man and deserves all the credit he gets.
12-19-2012 | 10:52 AM
#10
Rob
Joined: Aug 2001
Posts: 21,637
Likes: 12
From: Ms
They are honest and great guys, Ive dynoed my motors 6 different times there,With the new work load they hired a new manhinest thats one of the best,Im taking all my machine shop work to them from now on. I was there a few weeks ago picking up a new Dart block, they must of had 12 sets of 1075's getting rebuilt,Ive never seen so many in one place
Rob
http://www.offshoreonly.com/forums/g...-build-up.htmc
[YOUTUBE]http://www.youtube.com/watch?v=YfV1jsGCj8s&feature=share&list=PL3714CB5FD 51F7EE2[/YOUTUBE]
Rob
http://www.offshoreonly.com/forums/g...-build-up.htmc
[YOUTUBE]http://www.youtube.com/watch?v=YfV1jsGCj8s&feature=share&list=PL3714CB5FD 51F7EE2[/YOUTUBE]
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
Last edited by Strip Poker 388; 12-19-2012 at 12:05 PM.
