View Poll Results: Bravo XR drive breakage
Broke upper gear set
71
82.56%
Broke lower gear set
15
17.44%
Voters: 86. You may not vote on this poll
Bravo XR drive breakage
#91
Platinum Member
Platinum Member
iTrader: (6)
Im running way more than 600 a side with XR's and IMCO bottoms, zinged the props a few times at the Cig event on LOTO and held up so far......... TPB all depends on the budget, I dont think you need to go over kill with 600 hp, you could drop 15k + for a Imco SCX but dont think you need to.
#92
Registered
My personal opinion that means nothing, a XZ drive. Since they do not make the whole drive I think I said it on here before. When a friends 525 powered XR drive started to pit the gears he bought XZ gears, had them cryno treated and put in. I think he had 100 hours on it and every time he changed gear lube the plug was clean.
The guy has the boat in Chi town area now, think he may be at LOTO for the shootout. Its a 2007 35 single step fountain with a 18.5" X,,,,,,,, running 5 blades with diffuser rings so it will get on plane.
The following users liked this post:
105Fountain (08-13-2023)
#94
Platinum Member
Platinum Member
Taking a survey as to what you have personally had happen to your XR drive if it broke.
I need to know what failed first, not the other parts it took out in the process.
I am working on an improved upper gear set and also think the lowers are an issue for some as well.
Thx
I need to know what failed first, not the other parts it took out in the process.
I am working on an improved upper gear set and also think the lowers are an issue for some as well.
Thx
#96