Reversion with silent choice
#1
Platinum Member
Platinum Member
Thread Starter
iTrader: (3)
Join Date: Apr 2005
Location: St.Peters,Mo/5mm LOTO/LEOPA
Posts: 1,227
Received 136 Likes
on
81 Posts
Reversion with silent choice
When upgrading power, when is it time to get rid of the short risers and silent choice to avoid reversion?? Is there a specfic cam size that would be the threshold?
#4
Registered
iTrader: (1)
Bump, also curious?
Engine will be a N/A 509 with Stainless Marine manifolds and stock 502 mag heads. The engine is going in for a rebuild and I'd like to add a little power while I'm there but am on the fence about removing the captain's call.
-Cole
KE performance says nothing over 230*.
What say you?
Engine will be a N/A 509 with Stainless Marine manifolds and stock 502 mag heads. The engine is going in for a rebuild and I'd like to add a little power while I'm there but am on the fence about removing the captain's call.
-Cole
KE performance says nothing over 230*.
What say you?
Last edited by Cole2534; 08-04-2014 at 02:29 PM.