Need to replace my guages!
07-21-2002 | 08:02 AM
#1
Thread Starter
Charter Member # 430
Joined: Nov 2000
Posts: 288
Likes: 1
From: Orange County, So Cal!
Need to replace my guages!
Have a Commander 2300LX, got the guages ripped off. Would like to replace them with Gaffrig. Who has a good place in the San Fernando Valley or nearby?
Nort, you know of anything?
Nort, you know of anything?
07-21-2002 | 08:27 AM
#3
Thread Starter
Charter Member # 430
Joined: Nov 2000
Posts: 288
Likes: 1
From: Orange County, So Cal!
In front of a friends business. I of course don't pass blame, but the day we had the baby, the boat was parked for a short time. I couldn't get to it to because I was in the hospital with G.
They took the stereo system as well. Not a single print either.
*******s.
They took the stereo system as well. Not a single print either.
*******s.
07-21-2002 | 08:50 AM
#4
Charter Member#157
Joined: Oct 2000
Posts: 1,859
Likes: 3
From: Minneapolis, Mn, Usa
No that really sucks
I keep my boat in secure indoor storage when not in use.
However, they are closed on weekends and I am forced to keep it outside on the street on Sat & Sun nights
I just hate it.\
I am on a culdesac so the only traffic is neighbors and thier known associates.
I try to keep it under the street light but sometimes I think that will just give people the needed light to Work it over
Wish there was sometype of motion alwarm I could put in it on a day by day basis. With a remote activation??
any ideas?? would have to have at least a 130dB siren
Takes alot of time to take out guages. Hell I need to bend my arm just to get to the speedo hose
Best of luck on the re-fit
I keep my boat in secure indoor storage when not in use.
However, they are closed on weekends and I am forced to keep it outside on the street on Sat & Sun nights
I just hate it.\I am on a culdesac so the only traffic is neighbors and thier known associates.
I try to keep it under the street light but sometimes I think that will just give people the needed light to Work it over
Wish there was sometype of motion alwarm I could put in it on a day by day basis. With a remote activation??
any ideas?? would have to have at least a 130dB siren
Takes alot of time to take out guages. Hell I need to bend my arm just to get to the speedo hose
Best of luck on the re-fit
__________________
This Cat is trying to keep up with the Big Dogs
This Cat is trying to keep up with the Big Dogs
07-21-2002 | 12:57 PM
#7
Registered
Joined: Jun 2001
Posts: 618
Likes: 0
From: Alexandria, VA
Remember to change your sendars as well. Most stock senders don't play nice with aftermarket guages....Spent the last 7 weeks trying to figure out an oil pressure problem and it turned out to be a non-teleflex sender that has the guage working in reverse!!!!
07-21-2002 | 01:08 PM
#8
VIP Member
Joined: Dec 2001
Posts: 257
Likes: 0
From: Itasca, IL
You can give Gaffrig - Livorsi Marine, a call directly at 847-548-5900. Mike Livorsi will likely talk to you if he is not buried and you ask for him. Super people and a great rapport with their customers.
No I don't work for them, but I live nearby and have had nothing but positive experiences with them.
Tim Fitzgerald
No I don't work for them, but I live nearby and have had nothing but positive experiences with them.
Tim Fitzgerald
07-21-2002 | 02:37 PM
#9
Thread Starter
Charter Member # 430
Joined: Nov 2000
Posts: 288
Likes: 1
From: Orange County, So Cal!
Thanks for the tip KLM, I'll ask about that. And thanks for the direction friends. I'll tell ya how it goes.
