It's on!!!!! Thanks Tinkerboater!!!
#1
Gone Fishin'
Charter Member
Thread Starter
Join Date: Nov 2000
Location: Grand Rapids/Holland/Grand Haven
Posts: 7,408
Likes: 0
Received 0 Likes
on
0 Posts
It's on!!!!! Thanks Tinkerboater!!!
Well, we finally got the transom assembly bolted on my boat. Tomorrow after work I'll put the exhaust back on, adjust the shift cable, and hook up a few wires and be good to go for the weekend!!!! Only issue I still have is that I seem to have lost the gasket that goes around the water passage between the drive and the bell housing. I'll get on tomorrow and call it good!!!
Thanks Steve, couldn't have done it without you.
And thanks for all the OSO support this week. Kept me going. It's been a bad couple of weeks (truck, boat, job) and it's people like all of you that keep me sane!!! Thanks!!!!
Mike
Time for a shower. Mad do I stink!
Thanks Steve, couldn't have done it without you.
And thanks for all the OSO support this week. Kept me going. It's been a bad couple of weeks (truck, boat, job) and it's people like all of you that keep me sane!!! Thanks!!!!
Mike
Time for a shower. Mad do I stink!
__________________
[b]M Go Blue.......Gator boots, gator luggage, gator purses... all at cut rate deals!!!!
[b]M Go Blue.......Gator boots, gator luggage, gator purses... all at cut rate deals!!!!
#2
Charter Member #655
Charter Member
Way to go Mike!!!!!hope things take a turn for the better!hope to see you on the lake this weekend.I'll be your chase boat if you chase me!!!!just kidding
Don
Don
__________________
If your boat has a sail do you ride a horse to the ramp?
If your boat has a sail do you ride a horse to the ramp?
#3
Registered
Join Date: Oct 2000
Location: On the river
Posts: 3,372
Likes: 0
Received 0 Likes
on
0 Posts
Man mike thats great to hear... you didn't need anymore trouble this year The water passage should just have a o-ring to seal it... get one and your set...
I am sure my little lady and I just called it quit's.. So why don't you find a me a nice older sugar momma for me if I make it to the poker run...
Travis
I am sure my little lady and I just called it quit's.. So why don't you find a me a nice older sugar momma for me if I make it to the poker run...
Travis
#7
Charter Member #232
Charter Member
Later I have to agree with ya there
Foul good to hear ya got her going back together. I finished blassing all the holes up in my boat this evening. Just one more eveing of grinding and glassing and she should be ready for prime!!!!
Foul good to hear ya got her going back together. I finished blassing all the holes up in my boat this evening. Just one more eveing of grinding and glassing and she should be ready for prime!!!!
__________________
Put your best foot forward!
Put your best foot forward!
#9
The transom assembly is the part that bolts onto the transom and then the outdrive bolts to that. Mikes gimbal ring broke and had to be replaced. Was easier to replace the entire assembly rather than just the ring and Mike got a good used one for cheap.
And the help was cheap also.
And the help was cheap also.
#10
Charter Member #232
Charter Member
Tinkerboat. You make sure that biatch is over at your house pollishing your boat ASAP
Jon
Jon
__________________
Put your best foot forward!
Put your best foot forward!