Marine Generators
#12
a word of caution we had to replace the engine on a 5.0 westerbeke its a 3 cylinder 8hp mitubishi industrial engine but it had a cat built into the exaust manifold(even i did not know about it) it plugged and slowly killed the little engine it was 5 grand for parts to rebuild or 2 grand for a new long block this unit had 3000 hrs in a fishing boat new as of last fall their now fuel injected and around 12g
#13
Registered
I have a 5kw Kohler on the formula. It's a nice compact genset, but it had not been used for quite a while. It only had 8 hours on it when I bought the boat. Lack of use seems to be what makes these things so temperamental. I went through it and caught up all the maintenance and now make it a habit to run it for a few hours every time we go out. Seems fine now.
#15
Registered
put something nice in your fine boat, dont install a piece of crap genset. look at a notherm lights, with sound shields, they run for ever...top of the line equipment... rm
http://www.lugger.com/
here is a 4.5 kw their smallest http://www.lugger.com/marine/M673LD3.html
http://www.lugger.com/
here is a 4.5 kw their smallest http://www.lugger.com/marine/M673LD3.html
#16
This is what we put in all the Bajas; er, I mean ATs.
http://www.westerbeke.com/Products/P...erator&Group=4
http://www.westerbeke.com/Products/P...erator&Group=4
#17
Registered
Thread Starter
This is what we put in all the Bajas; er, I mean ATs.
http://www.westerbeke.com/Products/P...erator&Group=4
http://www.westerbeke.com/Products/P...erator&Group=4