Offshoreonly.com - M T I 36 with twin 1350

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - M T I 36 with twin 1350 (https://www.offshoreonly.com/forums/general-boating-discussion/308917-m-t-i-36-twin-1350-a.html)

Quote:

Originally Posted by chattviper (Post 4087812)

Tim, since my boat is at MTI right now, why don't you ask randy to throw some 1350's and big gears in her! Have randy take take her for a spin and see what she will do...LOL.
I like my 1100 set up though. Long as I can run with Chad, I'm happy! I like my lil dragster!

I will vouch for the dragster comment... That thing accelerates like a dang sport bike! I will have a little extra for ya this year if I can ever get the crap I bought from "you know who" fixed! I am going to leave the setup where it doesn't run any faster on top but I may just be able to keep up with your butt now, either way I can't wait to get out and burn some gas brother!

Quote:

Originally Posted by 44MTI (Post 4087342)

Your exactly right on the size not makeing much if any difference in topend, I just didn't want to say it because it might hurt some feelers. The only advantge the smaller boat has is in acceleration because of less weight, do to the size difference. Top end won't really change because the longer tunnel will cary the bigger boat once it gets packing air. The biggest difference is going to be in set up and water condtions. As in your case the gear ration difference and the fact that the 1100's make more torque are big factors for him accelerating faster. 1.42 is a very low gear which gives great acceleration and makes you not notice the difference in load as much, but it will kill topend. I would bet he could turn a 40 pitch pretty easily. Also don't forget about prop rotation, this made 5 mph difference in my 44, as well as a big difference in acceleration and ride. Most people don't care for the ride and sterring with outboard rotation in a smaller ride, but I just couldn't give up the speed/acceleration so thats the way I ran mine most of the time. Just for reference my 44 ran 155 with 1075's and 167 with 1200 computers.

I ran about 152 with the 1075's but I put the Stage II Whipple Kit with the twin 2.9L blowers on this winter so we will see.... I will probably leave the 38" wheels on for now. With the 1.35 gears I should be able to go as fast as I need to and get there pretty quickly but anything faster than 160 is just too fast for me to be honest. I am very happy with the 150 range and getting there quick.

Chad, Mark- Are you guys coming to Desert Storm again this year? I know I met Mark last year... Oh and more importantly than the boats, bring all those smoking hot fine woman you guys always have with ya, that I used to see when I was friends with you all on FB.

PS- I didn't unfriend you guys, I deleted my account! Lmao

-Chad

Quote:

Originally Posted by gofastlvr (Post 4088885)

I think most of the MTI's run 150ish with 1075's reguardless of size. I think you will really like the upgrades, should be able to make 1200 on pump gas pretty easy, and hopefully got the rev limiter raised to 6500ish. The combination of these two things will make a huge difference. It was over 10mph for my 44.
Just curious what rotation you were running and RPM's last yr.

Quote:

Originally Posted by 44MTI (Post 4089108)

I was running 38" Herings and ran right at 152 at 6150-6200. My limiter was at 6400 but couldn't pull it that fast when they were hooked up during hot weather. I slung a blade and bought a set of 1200HP Merc props, same pitch and rake and could only pull them about 5900 but I was at 148 so the boat tightened up some. I am spinning the props in and the boat handles like a sports car. I have always been very happy with the boat and the way it handled. I would imagine I can pull the props with the new blowers to the new rev limiter which I think Whipple set at 6500. If the slips stays close I should be right at 160 and that is as fast as I want to go. I could put some 40" wheels on there and really roll but I want to keep the acceleration.

I've heard that Merc props always run one size larger than Hering, if you like your 38 Herings then go with 37 Mercs.( this lowers the slip # on the Merc prop) I always liked the way the Herings ran. I do hear of fewer people slinging blades on the Merc props so there is definitely value in that.

Quote:

Originally Posted by maxonmike (Post 4088826)

Hummmm....... Sorry but my 388 is not for sale....

Hey MAXONMIKE any pixs or video of that insane looking 388 of yours..... #;s with the 1350's

NO REGRET$, clean out your pm box

Didn't Kent's 44 run 194 with 1320's?

Quote:

Originally Posted by 44MTI (Post 4090060)

NO REGRET$, clean out your pm box

DONE ....ty

[ATTACH=CONFIG]520719[/ATTACH]

Quote:

Originally Posted by NO REGRET$ (Post 4089521)

Hey MAXONMIKE any pixs or video of that insane looking 388 of yours..... #;s with the 1350's

Sure... First one is not great quality but you get the idea... Second one is better quality but kinda short.... BTW... There was ALOT more sugar left in the gum.... :eekdrop: