|
Looking good!
|
Awesome!
|
Good luck with the project Pete! I hope to put a few more hours on my SCX's this year! Are you going to have the lowers blueprinted? Let me know if you need spacers.
|
Originally Posted by TCBoss302
(Post 4115957)
Good luck with the project Pete! I hope to put a few more hours on my SCX's this year! Are you going to have the lowers blueprinted? Let me know if you need spacers.
|
Originally Posted by drpete3
(Post 4115975)
Not going to blueprint unless needed. I have already spent too much money and for sure Ill be contacting you for spacers if it looks like Ill need them. With out spacers my propshaft will be about 2.5 in below the bottom of the boat. Going to try it. I hope next weekend we will be ready for a seatrial.
|
Very cool
|
Originally Posted by drpete3
(Post 4115975)
With out spacers my propshaft will be about 2.5 in below the bottom of the boat. Going to try it.
|
4 Attachment(s)
[ATTACH=CONFIG]523139[/ATTACH][ATTACH=CONFIG]523140[/ATTACH][ATTACH=CONFIG]523141[/ATTACH][ATTACH=CONFIG]523142[/ATTACH]
|
make sure you check helmet clearance in the full trim position may hit gimbal , had one customer crack his gimbal when it hit
|
Originally Posted by bay performance
(Post 4119222)
make sure you check helmet clearance in the full trim position may hit gimbal , had one customer crack his gimbal when it hit
|
| All times are GMT -5. The time now is 10:16 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.