|
Pirdie :cheer:
|
How do you adjust if it does hit? Do you just limit trim adjustment
|
merc makes spacers to go in your trim cylinders. mine just barely touched, but I had a trim selinoid stick and the pump over came the springs in the trim cylinders and broke the gimbal right at the swivel pins. The spacers are a cheap and easy install, so make sure you have plenty of room
|
Just be careful when you trim up for the first time Pete, take it slow to make sure your not gonna hit.
|
Be sure and watch the 4 screws that go into the hinge pin. I lost All on one side and 7 on other last yr. Go figure!
|
Originally Posted by Quinlan
(Post 4119382)
Be sure and watch the 4 screws that go into the hinge pin. I lost All on one side and 7 on other last yr. Go figure!
|
3 Attachment(s)
very excited guys [ATTACH=CONFIG]523189[/ATTACH][ATTACH=CONFIG]523190[/ATTACH][ATTACH=CONFIG]523191[/ATTACH]
|
Originally Posted by drpete3
(Post 4119671)
very excited guys [ATTACH=CONFIG]523189[/ATTACH][ATTACH=CONFIG]523190[/ATTACH][ATTACH=CONFIG]523191[/ATTACH]
|
They are now.
|
Oh hell yes !!
|
| All times are GMT -5. The time now is 11:17 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.