center state exchange
03-05-2017 | 07:15 AM
#11
Registered
Joined: Mar 2017
Posts: 7
Likes: 0
I've alway used Center State Engine.
well the engines both had bad cams, they fixed them, I got them back last Friday the 2nd, had them marinized and Fired up Friday the 9th, Valve covers leaking, but the engines sound healthy this time, they say they will cover everything I had to do in the middle, set up, tear down, palletize and crate and send them back. while it put a hurtin on my customer and myself, **** happens, and they seem to uphold their end, will let you know when i get the check.
I still think, had these been Chevy's they would have run right from the beginning, but i am biased.
I still think, had these been Chevy's they would have run right from the beginning, but i am biased.
03-05-2017 | 08:11 AM
#13
Registered
Joined: Sep 2015
Posts: 11
Likes: 0
We ran them on blocks, after everything else, first trip out the right hand engine rear main seal started leaking, I am assuming a left hand seal was put in on the reman. Let's say it is just me, but after everything that happened, I won't go back to them.
03-05-2017 | 12:51 PM
#15
Registered
Joined: Oct 2012
Posts: 2,227
Likes: 531
03-05-2017 | 01:06 PM
#16
Banned
Joined: Jul 2011
Posts: 9,594
Likes: 45
From: Ft. Worth TX
A lot of rec mass production boat owners do not know of any sort of engine problems until 1, the engine does not start anymore 2nd the engines noise becomes so loud that they get online and ask is this normal posting a youtube vid, 3 rd if their bilge fills up with water, 4 th is their bilge fills up with oil. 5. if something is smoking and just so happen to notice it or a very loud warning horn going off but most ignore the very loud warning horn anyways.
03-05-2017 | 01:07 PM
#17
Registered
Joined: Mar 2017
Posts: 7
Likes: 0
help people like me when I was in a jam. Didn't even charge me when it really was my fault.
03-05-2017 | 03:22 PM
#18
Registered
Joined: Sep 2015
Posts: 11
Likes: 0
It is not bashing if it is the truth, these sites are here to help us all, we use them extensively to gather valuable time saving information, we joined this site to give back to the community.
From the outside looking in you probably thing Boo Hoo, hopefully with this information the rest of you won't be on the inside looking out
From the outside looking in you probably thing Boo Hoo, hopefully with this information the rest of you won't be on the inside looking out
03-05-2017 | 10:32 PM
#19
Registered
Joined: Jan 2004
Posts: 1,571
Likes: 0
From: Saint Petersburg Fl
I bought a new long lock from them in October of last year. I am couple hours away so went and picked it up. Got to see shop and save some shipping. Has been trouble free so far ( have little over 50hrs on it)
03-05-2017 | 10:51 PM
#20
Registered
Joined: Nov 2004
Posts: 14,068
Likes: 3,667
From: On A Dirt Floor
It is not bashing if it is the truth, these sites are here to help us all, we use them extensively to gather valuable time saving information, we joined this site to give back to the community.
From the outside looking in you probably thing Boo Hoo, hopefully with this information the rest of you won't be on the inside looking out
From the outside looking in you probably thing Boo Hoo, hopefully with this information the rest of you won't be on the inside looking out
well the engines both had bad cams, they fixed them, I got them back last Friday the 2nd, had them marinized and Fired up Friday the 9th, Valve covers leaking, but the engines sound healthy this time, they say they will cover everything I had to do in the middle, set up, tear down, palletize and crate and send them back. while it put a hurtin on my customer and myself, **** happens, and they seem to uphold their end, will let you know when i get the check.
I still think, had these been Chevy's they would have run right from the beginning, but i am biased.
I still think, had these been Chevy's they would have run right from the beginning, but i am biased.
