huskyrider

iTrader: (1)

You can't help but love this set up. Brutally affordable and 100 percent wet.

WAY TO GO!!!

See ya,
Kelly

ICDEDPPL

iTrader: (1)

Who needs drive showers with 2 gallons of gear oil

12meter joe

Just to clarify the topic. The boat in the picture is not mine, i seen it in the classifieds and though it was interesting.

kaama82

iTrader: (1)

Here's mine I made.[ATTACH=CONFIG]524311[/ATTACH][ATTACH=CONFIG]524312[/ATTACH][ATTACH=CONFIG]524313[/ATTACH]

3pointstar

Man does that look slick!-- have you had ANY cavitation issues -- looks like you have one big water pick up

3pointstar

kaama82

iTrader: (1)

No issues yet. Its a #8 line going up, then 3/8" tubing.

Griff

The shower I had on my 28 Pantera. Engine had separate water p/u.

The Get Away

iTrader: (1)

I saw a difference when I put showers on my trs drives. For one the white one the side of the drives went away, and it must hav cooled the drive oil enough that it stop spewing oil out of the vent after a hard run.

32hustlin

Anybody tap into the water passage on the drive itself? I have transom pickups, so I'd like to make use of the drive pickups

Not sure how I missed griff's picture

yschmidt

Yep.