I put 2 posts on my rear cross member near the bucks and plop 2 45 lb weights from my set on each side when I put the trailer in to take out the boat. Then I take them off after out of the water.

hey guys,happen to have a new american high performance 26 w/torsion axles,dic brakes,ss package in stock now.....great deal to OSO members......and floating isnt an option that comes with these......were a factory outlet for AHPT......813-247-3049 ask for AL,were in tampa.....can help get it to ya if need be....10 percent over cost

I have a towmaster aluminum trailer, but the 32-36, triple axle, triple disk brakes on a surge system with a reverse seloniod for backing up. No float problems, but probably due to being bigger and heavier than what a 24 would need. I dont think I'll ever get anything other than an aluminum, and I'm 1000's of miles from any saltwater.

I was waiting for someone to say something about the pvc thing.

I took off my post about the PVC. I said I was guessing anyhow. The rest of what I mentioned works though.

Brian, that concept sounded good though!

Steve

mopower you're right.

It took my wife to remind me that the water didn't work and I ended up filling the PVC with sand.

Sorry for being such an idiot. I guess I burned those brain cells out with too much Crown Royal.

Thanks Steve. I appreciate it.