|
Originally Posted by TooLateVTEC
(Post 4185806)
Grind a nice area around that crack down, clean it real good and throw some JB weld on that bird and rock on.
|
7 Attachment(s)
A few issues over the years haha
Early in boating I didn't know how important Inconel was... then went real lean with clogged fuel system found out Inconel holds never saw a valve look like that... then a TRS gear this spring... the latest was rod through oil pan a few weeks ago.... [ATTACH=CONFIG]529190[/ATTACH] [ATTACH=CONFIG]529184[/ATTACH][ATTACH=CONFIG]529185[/ATTACH][ATTACH=CONFIG]529186[/ATTACH][ATTACH=CONFIG]529187[/ATTACH][ATTACH=CONFIG]529188[/ATTACH][ATTACH=CONFIG]529189[/ATTACH] |
looks like the same guy did mine haha
Originally Posted by 88bullet
(Post 4185172)
this was about 20 min of a 598ci by a now out of work engine builder
[ATTACH=CONFIG]529083[/ATTACH][ATTACH=CONFIG]529084[/ATTACH] |
Originally Posted by snapmorgan
(Post 4184991)
Seriously though, I wish this was the worst of it. I hit something submerged running about 55mph, trashed the drive, broke a u-joint and destroyed the transom assy. Parts were flying everywhere and making lots of crunchy sounds.
ouch! looking at the pic I cant imagine the noise that let out but I'm guessin it got you attention instantly :eek: |
Originally Posted by snapmorgan
(Post 4184991)
Seriously though, I wish this was the worst of it. I hit something submerged running about 55mph, trashed the drive, broke a u-joint and destroyed the transom assy. Parts were flying everywhere and making lots of crunchy sounds.
|
Originally Posted by phragle
(Post 4185867)
Guess I got lucky... I tagged something at 60 a couple weeks ago, only had to replace the skeg and prop. Holy phuck it was loud though..BAM!!!!
|
Originally Posted by OCCJoe
(Post 4185984)
I hit a alligator in my Pantera a few years ago . Didn't hurt anything on the boat and nobody was willing to dive in and check on the gator so I don't know if he had any damage .
|
Originally Posted by snapmorgan
(Post 4185019)
Now that I have everyone's attention, I will be needing a complete HP transom assy and a BBC bellhousing and coupler. Need to be in like new condition. PM me if you have all or some. Thanks
|
3 Attachment(s)
Ahhhh memories......
Lost oil pressure.... [ATTACH=CONFIG]529243[/ATTACH][ATTACH=CONFIG]529244[/ATTACH][ATTACH=CONFIG]529245[/ATTACH] |
Didn't want to show my stuff off because first time was our own fault. You should check piston to valve clearance when changing cams. Maybe thats why I don't build engines.
[IMG]http://i1069.photobucket.com/albums/...psac1be663.jpg[/IMG] [IMG]http://i1069.photobucket.com/albums/...psc128b445.jpg[/IMG] [IMG]http://i1069.photobucket.com/albums/...psd3f34dd2.jpg[/IMG] |
| All times are GMT -5. The time now is 03:05 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.