Outerlimits SV29 West Coast Edition goes into Production...!!!
10-26-2014 | 10:40 AM
#72
Registered
Joined: Oct 2000
Posts: 705
Likes: 65
From: Norway
Hi
You are welcome
I will use 20 inch legs too to get the center of gravity as low as possible. You do not want to have a flywheel rotating over your head
The reason reccommending jackplates are that you will have the flexibility to find the sweetspot for the propheight and balance of the boat. Later on you can use a bracket of some kind of course. I love jackplates. Great to have in heavy seas and cruise, and just the little extra tweak to gain the important extra mph. Lots of good jackplates around with different setback and height adjustments. My Stainless Marine Gorilla has been flawless. Very very strong. Good responses on Bob HD ones too.
Cheers Toffen
You are welcome
I will use 20 inch legs too to get the center of gravity as low as possible. You do not want to have a flywheel rotating over your head
The reason reccommending jackplates are that you will have the flexibility to find the sweetspot for the propheight and balance of the boat. Later on you can use a bracket of some kind of course. I love jackplates. Great to have in heavy seas and cruise, and just the little extra tweak to gain the important extra mph. Lots of good jackplates around with different setback and height adjustments. My Stainless Marine Gorilla has been flawless. Very very strong. Good responses on Bob HD ones too.
Cheers Toffen
10-26-2014 | 11:10 AM
#73
Thread Starter
Registered User
Joined: Jul 2007
Posts: 859
Likes: 0
From: Alta Loma, CA
10-26-2014 | 01:09 PM
#75
Registered
Joined: Dec 2008
Posts: 218
Likes: 1
From: Hamble Le Rice England
Just been doing some measuring with the boat sitting level and a string line over the bustle it is approximately 3ft 2" to the start of the running surface making the hull length 26ft 9", the actual wetted running length at speed on smooth water is approximately 14ft.
Peter
Peter
10-26-2014 | 05:03 PM
#76
Registered
Joined: Oct 2007
Posts: 1,563
Likes: 0
From: minnesota
Just been doing some measuring with the boat sitting level and a string line over the bustle it is approximately 3ft 2" to the start of the running surface making the hull length 26ft 9", the actual wetted running length at speed on smooth water is approximately 14ft.
Peter
Peter
10-29-2014 | 10:21 AM
#78
Registered
Joined: Dec 2008
Posts: 218
Likes: 1
From: Hamble Le Rice England
Hi 575cat,
The vent tube has a hinged flap which is closed by an internal stainless steel spring, the outside of the cap is connected to the transom with a nylon cord as you trim in the cap progressively opens so you can always find the sweet spot for planing of in any sea conditions, once on plane with the drive in it's normal running trim the flap is completely closed i can then slow right down to 20mph without the boat falling of plane. It has the added advantage being angled in to the bustle that you don't send up a huge column of water when in reverse if you need to stick some revs on.
Peter
The vent tube has a hinged flap which is closed by an internal stainless steel spring, the outside of the cap is connected to the transom with a nylon cord as you trim in the cap progressively opens so you can always find the sweet spot for planing of in any sea conditions, once on plane with the drive in it's normal running trim the flap is completely closed i can then slow right down to 20mph without the boat falling of plane. It has the added advantage being angled in to the bustle that you don't send up a huge column of water when in reverse if you need to stick some revs on.
Peter
11-02-2014 | 01:09 AM
#80
Registered
Joined: Nov 2013
Posts: 126
Likes: 0
From: Manhattan NY
I really like the thought maybe go out and upset the apple cart once again slap a couple of G2 300R Evinrude E-Tec's on her see how she flies hey there supposed to be making 315hp at the props and if there anything like my motors now and there supposed to be way better Id shock the hell out of the Merc Bots on the south shore of Long Island....... 
Let's do one...!!!
