From Cat to Console, a Nor-Tech CC is in my Future
#443
Registered
Thread Starter
Black Tie Affair
Black Tie Affair has been here in NC for 2 weeks but yet to see the water due to my work schedule. Supposed to be sunny & 80 Sat & Sun so I plan to make up for the lost time. I hope to get some fuel burn & performance #'s too.
In the meantime I could use some more forum input on the boat name layout. As you know Black Tie Affair trumped NASTECH and all along I was thinking whatever the name ended up being that it would end up centered on the backside of the bench seat. When I got the artwork back from RedEye Designs he provided a few across all 3 rear bench panels that I hadn't really considered. Sorry I didn't have any clean straight on transom shots.
Your thoughts? I'm leaning towards #5.
In the meantime I could use some more forum input on the boat name layout. As you know Black Tie Affair trumped NASTECH and all along I was thinking whatever the name ended up being that it would end up centered on the backside of the bench seat. When I got the artwork back from RedEye Designs he provided a few across all 3 rear bench panels that I hadn't really considered. Sorry I didn't have any clean straight on transom shots.
Your thoughts? I'm leaning towards #5.
#445
Registered
#5.
#446
Registered
Agree. #5. I noticed it said 3" letters. Is that for the BTA lettering or for the port?
#447
Registered
Thread Starter
#448
Registered
Thread Starter
#449
Registered
Yeah, I don't have a picture of my transom with lettering on, but the name crosses all 3 panels like you plan to do. I have the port in the center panel like yours, and I know it is not 4". I'm thinking we settled around 2.5-3 inches for that. But the main name is larger than 4", my guess is probably 5-6". We just measured the area on each of the 3 panels then made the letters the size that centers the name and looks best.