Notices
General Boating Discussion

DTS Trottle Adjusment

Old 07-05-2015 | 07:22 AM
  #1  
ROADHOG's Avatar
Thread Starter
Registered
20 Year Member
 
Joined: Mar 2001
Posts: 628
Likes: 1
From: Walled Lake Michigan
Default DTS Trottle Adjusment

When moving throttles forward once in gear there is a hesitation before RPMs pickup. Is this common or is there an adjustment? Don't remember having this issue on old boat.

DTS is 2015 300 Verado's
ROADHOG is offline  
Reply
Old 07-05-2015 | 03:26 PM
  #2  
BUP
Banned
 
Joined: Jul 2011
Posts: 9,594
Likes: 46
From: Ft. Worth TX
Default

DTS actually works half the speed of cable set ups for throttle plate opening.. The big reason for this is the manufacturer has better control (slower) for how the engine is ran by the end user especially for snap opening acceleration. This also helps decrease warranty issues for the manu on new engines believe it or not along with the manu has better control for improving fuel mileage as well. It seems DTS can produce lag time as even the auto world has been complaining about this.

Do not try to clean (spray) or force open any DTS throttle plates for any DTS apps,

There really is no adjustments that the end user should try to do. Just saying

Last edited by BUP; 07-05-2015 at 04:31 PM.
BUP is offline  
Reply
Old 07-05-2015 | 04:38 PM
  #3  
BUP
Banned
 
Joined: Jul 2011
Posts: 9,594
Likes: 46
From: Ft. Worth TX
Default

Years ago and in OEM marine schools they never brought up about any negatives of having DTS but I notice playing around with a Mercruiser 496 DTS having someone shift (slower going into gear) and move the throttle forward how much slower the throttle plate opened when I watched it compared to a cable throttle & cable shift.

Anyways I found this online to show you..
Watch the full video - its on the auto side but showing exactly what I am talking about.

I could not find anything on the marine side for comparison. But the same applies there to.

https://www.sprintboosterusa.com/t-media.aspx

Last edited by BUP; 07-05-2015 at 09:32 PM.
BUP is offline  
Reply
Old 07-06-2015 | 07:46 AM
  #4  
ROADHOG's Avatar
Thread Starter
Registered
20 Year Member
 
Joined: Mar 2001
Posts: 628
Likes: 1
From: Walled Lake Michigan
Default

Makes sense except on my last DTS system it did not have any lag. Also there is no lag when going in reverse. Makes docking exciting when current or wind are a factor
ROADHOG is offline  
Reply
Old 07-06-2015 | 10:44 PM
  #5  
BUP
Banned
 
Joined: Jul 2011
Posts: 9,594
Likes: 46
From: Ft. Worth TX
Default

SC combined with DTS engines might cause the lag. It could also be in the control box or the DTS actuator for the lag as well.

Its a 2015 take it back to a OEM Mercury certified Verado dealer. They can scan it and run fuel pressure checks and check all shift actions if you REALLY THINK you have issues and at no change or at least it should be no charge. Just saying.

I will add I have never worked on a Verado app but know a bit about them. Not like Mercruiser apps Just saying.
BUP is offline  
Reply
Old 07-07-2015 | 06:21 AM
  #6  
ROADHOG's Avatar
Thread Starter
Registered
20 Year Member
 
Joined: Mar 2001
Posts: 628
Likes: 1
From: Walled Lake Michigan
Default

Just trying to get some info before I ask a Dealer Only have about 2 months of boating left really don't want to tie boat up at a dealer for weeks, Here in Detroit area there is only 1 Verado dealer that I would trust and always backed up.
Originally Posted by BUP
SC combined with DTS engines might cause the lag. It could also be in the control box or the DTS actuator for the lag as well.

Its a 2015 take it back to a OEM Mercury certified Verado dealer. They can scan it and run fuel pressure checks and check all shift actions if you REALLY THINK you have issues and at no change or at least it should be no charge. Just saying.

I will add I have never worked on a Verado app but know a bit about them. Not like Mercruiser apps Just saying.
ROADHOG is offline  
Reply
Old 07-07-2015 | 06:49 AM
  #7  
wrinkleface's Avatar
Registered
 
Joined: Jan 2003
Posts: 8,022
Likes: 1
From: Michigan
Default

Jerry, what is the manufacturer say'n????
wrinkleface is offline  
Reply
Old 07-07-2015 | 06:57 AM
  #8  
Offshoreonly Advertiser
20 Year Member
Offshoreonly Advertiser
 
Joined: Jan 2001
Posts: 2,063
Likes: 27
From: spring valley,ny usa
Default

manufacturers advice AVOID WRINKLEFACE !
sy goldberg is offline  
Reply
Old 07-07-2015 | 10:13 AM
  #9  
ROADHOG's Avatar
Thread Starter
Registered
20 Year Member
 
Joined: Mar 2001
Posts: 628
Likes: 1
From: Walled Lake Michigan
Default

Have not heard back from them, they text and say they will call and never hear back from them. Getting frustated but what can you do I'TS the MARINE industry. Left message with Mercury last week also, never heard back,

Once they have your money SEE YOU LATER!!!!
Originally Posted by wrinkleface
Jerry, what is the manufacturer say'n????
ROADHOG is offline  
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.