Offshoreonly.com - Weiand blower on a 330hp

Page 8 of 8

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - Weiand blower on a 330hp (https://www.offshoreonly.com/forums/general-boating-discussion/333657-weiand-blower-330hp.html)

8T8242LS

01-12-2016 04:18 PM

Looks cool 79 👍

SFOcean

01-12-2016 09:00 PM

You may already know this; the maximum trim limit switch should be set at 21.75" center to center on Bravo drive trim rams. If you let the rams extend more than that under power, the drive is not supported in the gimbal, also hard on u-joints.

phragle

01-12-2016 10:12 PM

Quote:

Originally Posted by SB (Post 4393040)

Learn to drive your boat intimately, one step at a time. You need to respect it.Oh, and mother nature too. She can and will always be a whore.

^That^ One weekend Im a hero with a helicopter following me cameras blazing, the next weekend I am getting a hard time for parking my boat at PIB and taking the jet express. Have fun, hang it out, learn your equipment, refine your skills but most importantly, DONT GET STUPID.

phragle

01-12-2016 10:18 PM

Quote:

Originally Posted by 8T8242LS (Post 4393038)

Yep your exactly right limit switch puts it about 1/2 on the gauge !

You need to know where on your gauge is neutral trim, where the drive is parallel with the bottom.. My boat likes the drive parallel and handling the trim with the tabs. It makes a huge difference in how my boat runs.

All times are GMT -5. The time now is 12:24 PM.

Page 8 of 8

« First

Show 40 post(s) from this thread on one page