Weiand blower on a 330hp
01-12-2016 | 09:00 PM
#72
Charter Member #394
Joined: Nov 2000
Posts: 534
Likes: 38
From: CA
You may already know this; the maximum trim limit switch should be set at 21.75" center to center on Bravo drive trim rams. If you let the rams extend more than that under power, the drive is not supported in the gimbal, also hard on u-joints.
01-12-2016 | 10:12 PM
#73
Registered
Joined: Apr 2006
Posts: 10,042
Likes: 712
From: Toledo Oh
^That^ One weekend Im a hero with a helicopter following me cameras blazing, the next weekend I am getting a hard time for parking my boat at PIB and taking the jet express. Have fun, hang it out, learn your equipment, refine your skills but most importantly, DONT GET STUPID.
01-12-2016 | 10:18 PM
#74
Registered
Joined: Apr 2006
Posts: 10,042
Likes: 712
From: Toledo Oh
You need to know where on your gauge is neutral trim, where the drive is parallel with the bottom.. My boat likes the drive parallel and handling the trim with the tabs. It makes a huge difference in how my boat runs.
