Need Some Dyno test results for 496
10-24-2016 | 10:48 AM
#63
Registered
Joined: Jun 2005
Posts: 8,412
Likes: 798
From: Central IL
MAG only. Bent a rod so bored .030 over, SRP forged pistons, Scat H-beam rods, otherwise stock with the heads cleaned up and a valve job. I contemplated turning it into an HO but it is out of a runabout that I was planning to sell so it didn't make sense financially. Stock exhaust with turbulators still installed. This was dyno'd wet with the stock exhaust and all accessories installed.
