|
Tyson what is the torque going to be at the prop after the overdrive?
Gas motors benefit from the reduction giving and increase in torque whereas overdriving the diesels has the opposite effect. |
Why didnt you do a canopy? Between the sun and possibly rain or rough seas, wont that make the trip more difficult?
I assume each "leg" there is no sleep? |
5 Attachment(s)
Cockpit cover: Boats that go on a tilt trailer cannot use a pole to hold the center of the cover up because it could become loose and scratch up the inside of the window or interior. I decided to try a different approach and make a valley down the middle between the seats for water to drain out the back and not need a pole to hold the middle up.
Here is a pic of making the template, and the second pic test fitting the cover the material was a little loose between the front and back seats and would flap in the wind so they tailored it to make it tight. I think its going to work pretty good. [ATTACH=CONFIG]556840[/ATTACH][ATTACH=CONFIG]556841[/ATTACH][ATTACH=CONFIG]556842[/ATTACH][ATTACH=CONFIG]556843[/ATTACH][ATTACH=CONFIG]556844[/ATTACH] |
Originally Posted by BigSilverCat
(Post 4454575)
Cockpit cover: Boats that go on a tilt trailer cannot use a pole to hold the center of the cover up because it could become loose and scratch up the inside of the window or interior. I decided to try a different approach and make a valley down the middle between the seats for water to drain out the back and not need a pole to hold the middle up.
Here is a pic of making the template, and the second pic test fitting the cover the material was a little loose between the front and back seats and would flap in the wind so they tailored it to make it tight. I think its going to work pretty good. [ATTACH=CONFIG]556840[/ATTACH][ATTACH=CONFIG]556841[/ATTACH][ATTACH=CONFIG]556842[/ATTACH][ATTACH=CONFIG]556843[/ATTACH][ATTACH=CONFIG]556844[/ATTACH] |
Originally Posted by BigSilverCat
(Post 4454575)
Cockpit cover: Boats that go on a tilt trailer cannot use a pole to hold the center of the cover up because it could become loose and scratch up the inside of the window or interior. I decided to try a different approach and make a valley down the middle between the seats for water to drain out the back and not need a pole to hold the middle up.
Here is a pic of making the template, and the second pic test fitting the cover the material was a little loose between the front and back seats and would flap in the wind so they tailored it to make it tight. I think its going to work pretty good. [ATTACH=CONFIG]556840[/ATTACH][ATTACH=CONFIG]556841[/ATTACH][ATTACH=CONFIG]556842[/ATTACH][ATTACH=CONFIG]556843[/ATTACH][ATTACH=CONFIG]556844[/ATTACH] |
Nice added detail ! You must be getting close if covers are being made.
|
Originally Posted by buck35
(Post 4454876)
Nice added detail ! You must be getting close if covers are being made.
|
I suppose close is a relative term, since you helped "deliver" this girl and now she's got a bra...on her head, lol.:D
|
Originally Posted by BigSilverCat
(Post 4454892)
Close? Well it's kind of like when a girl puts her bra on...you may think she's about ready to go, but then she may still have two hours of hair and makeup to finish.
|
Originally Posted by TriPaC87
(Post 4455021)
I have no idea what he is talking about :rolleyes:
|
| All times are GMT -5. The time now is 04:37 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.