Ebay, right up there with craigslist
11-03-2016 | 07:14 PM
#1
Thread Starter
Registered
Joined: Apr 2006
Posts: 10,042
Likes: 712
From: Toledo Oh
Ebay, right up there with craigslist
Holy mother of god...I hope this guy builds motors better than he spells..
http://www.ebay.com/itm/502-mpi-8-2-...UAAOSwUdlWcieJ
up for bid is a newly rebuilt gen -6 454 big block that has been engendered to be a direct replacement to a 502 mpi Mercruiser . Cam and cyl heads have been tailored to work perfectly with a stock computer and feul system . They make identical tourque and hp . To the standard 502 we sell this in long block form , upon sale we will need your complete upper and lower intake assy . ECM , harness , feul rail and complete feul system . We will install all those parts and dyno test the motor to be sure everything is functioning properly . This is a much less expensive alterintive to a new 502 long block, we sell these in several different combos, and they are very reliable good rung motors . The cores we start with are corrosion free ,and are in like new condition . if you are considering purcasing please call us at 585 671 0082 so that we are completly on the same page and you get exactly what you need. we are a full service engine shop that builds all types of engines from nascar touring to high performance marine to stock reman.and can supply you a custom built engine to your specs.
http://www.ebay.com/itm/502-mpi-8-2-...UAAOSwUdlWcieJ
up for bid is a newly rebuilt gen -6 454 big block that has been engendered to be a direct replacement to a 502 mpi Mercruiser . Cam and cyl heads have been tailored to work perfectly with a stock computer and feul system . They make identical tourque and hp . To the standard 502 we sell this in long block form , upon sale we will need your complete upper and lower intake assy . ECM , harness , feul rail and complete feul system . We will install all those parts and dyno test the motor to be sure everything is functioning properly . This is a much less expensive alterintive to a new 502 long block, we sell these in several different combos, and they are very reliable good rung motors . The cores we start with are corrosion free ,and are in like new condition . if you are considering purcasing please call us at 585 671 0082 so that we are completly on the same page and you get exactly what you need. we are a full service engine shop that builds all types of engines from nascar touring to high performance marine to stock reman.and can supply you a custom built engine to your specs.
11-03-2016 | 07:47 PM
#5
Thread Starter
Registered
Joined: Apr 2006
Posts: 10,042
Likes: 712
From: Toledo Oh
11-04-2016 | 12:36 AM
#6
Registered
Joined: Jan 2005
Posts: 3,570
Likes: 127
From: Pasadena, MD
The best motor builder we knew when we were kids was an old black guy that didn't know how to read or write. Most of the folks I know today couldn't figure out how to get on this forum if they tried.
11-04-2016 | 06:30 AM
#8
Registered
Joined: Nov 2004
Posts: 14,068
Likes: 3,667
From: On A Dirt Floor
11-04-2016 | 06:32 AM
#9
Registered
Joined: Nov 2004
Posts: 14,068
Likes: 3,667
From: On A Dirt Floor
I agree....there are a good amt like this...or use to be...well, maybe not that illiterate, but you went to him because of his track record.....not an unknown to you person with a brutal ad.
Last edited by SB; 11-04-2016 at 06:38 AM.
11-04-2016 | 06:58 AM
#10
Registered
Joined: Feb 2008
Posts: 6,756
Likes: 152
From: Connecticut
Let me guess....Give us your old worthless 502 core and we'll give you a nice new 454 making the same torque and HP !
I always thought, there is no replacement for displacement...is it possible for a stock 454 to make the same torque as a stock 502?
I always thought, there is no replacement for displacement...is it possible for a stock 454 to make the same torque as a stock 502?
Last edited by kreed; 11-04-2016 at 07:26 AM.
