Need to buy a Sea Strainer, who makes the best large capacity Sea strainer?

I have the gill on my hustler ,there ok. the scarab had the marine machine the looked better.i would go with the marine machine again. if had to buy again. i have the small one for the innercooler with fittings if anybody needs one . has the #16 inlet and 12 outlet polished stainless steel ,marine machine w/ spin off top looks brand new.i bought them at cp performance.give them a try on price.

Looks more like you have a Marine Machine on your 69 Z28

Teague makes a nice strainer as well, but it is sealed with several allen bolts so it is a little more time consuming to clean.

I am shopping for a pair for the 36 Outlaw.

Was ready to buy Machine Machine, they look awesome, when a dealer in Florida told me to go with Gill instead because they are smaller.

According to him the M/M are too big and reduce water pressure?

What is the thoughts on this?

Thanks Mark

The bigger the filter is the lower the pressure drop ( higher water pressure discharged from the pump) A bigger filter will not reduce water flow or pressure.

Go with MM, easy screw off lid for cleaning, and they look cool , worth the extra money, you know you'll clean them everytime you come back in, its so easy it takes 20 seconds.

I have the Gil strainers, and really struggle to get the lids back on after cleaning them, espcially if the boat's in the water. They are deep in the bilge, and the clamps are a real PITA to get centered on the flange of the body correctly. The other issue I run into is that there is only a disc for a strainer (not a basket), and this cuts down on filtering capacity a lot. It doesn't take much before they restrict the flow too much for good cooling. Since CORSA has bough Gil, they may have changed some of this now...

HEY MARK ,IT WILL NOT HURT YOUR PRESSURE EVEN IF IT WAS A 55 GALLON BARREL THE PRESSURE WILL STAY THE SAME ONCE ITS FULL ,
WPM RACING ,,TOMMY THE GUYS THAT BUILT THE NO FEAR CAT BUILD NICE SEA STRAINERS THAT ARE VERY GOOD AT A GOOD PRICE ,,,909-371-8247 TIL 8PM EST ,HAVE A GOOD ONE

go with mm & pls take those stuff over that first gen cam. you can danage the paint