38 (377) staggered scarab setup (x dimension)
03-14-2019 | 07:31 AM
#11
Registered
Joined: Oct 2000
Posts: 1,094
Likes: 57
From: Deland, Fl
2" up is not that bad. Your prop shaft center currently must be deeper than 6". Standard depth.
yours is staggered like my Bertram, mine was 6.25" below, with Konrads roughly 4.25" below. I gain 4 mph just with bolting on the Konrads. Still too deap to surface props but better. Then I put 650 HP per side and gained another 12 mph. 84 mph now baby. Turn her up to 750 HP per and I'm around 87-88.
Good luck brother.
yours is staggered like my Bertram, mine was 6.25" below, with Konrads roughly 4.25" below. I gain 4 mph just with bolting on the Konrads. Still too deap to surface props but better. Then I put 650 HP per side and gained another 12 mph. 84 mph now baby. Turn her up to 750 HP per and I'm around 87-88.
Good luck brother.
