|
Originally Posted by thisistank
(Post 4689351)
thats what speedy did. Came out super nice. https://cimg5.ibsrv.net/gimg/www.off...2a5348a0f.jpeg https://cimg6.ibsrv.net/gimg/www.off...dbdc5cb81.jpeg |
Thanks everyone for all the advise. Good stuff. I think I know how to do and what I’m going to do know. Going to pick up 4 of the prefab L brackets and mount a stainless 49” x 15 x 15 box nearly level with the bottom of the trailer frame (not hanging lower. It’ll be mounted opposite of the spare tire so no dual tires. I still have to see if my south Florida trailer is a bolt on spindle or solid. Then I’ll figure out the spindle situation. |
Originally Posted by thisistank
(Post 4689784)
Thanks everyone for all the advise. Good stuff. I think I know how to do and what I’m going to do know. Going to pick up 4 of the prefab L brackets and mount a stainless 49” x 15 x 15 box nearly level with the bottom of the trailer frame (not hanging lower. It’ll be mounted opposite of the spare tire so no dual tires. I still have to see if my south Florida trailer is a bolt on spindle or solid. Then I’ll figure out the spindle situation. *Let the Tank destruction project begin! Eeeek! LOL (love' ya man! :-) |
Originally Posted by Joe
(Post 4690537)
....your wife SOOOO needs to video you attempting this! Just sayin'!
*Let the Tank destruction project begin! Eeeek! LOL (love' ya man! :-) you going to loto? |
https://cimg3.ibsrv.net/gimg/www.off...25d20bb8d5.jpg
https://cimg5.ibsrv.net/gimg/www.off...bb1652370b.jpg https://cimg4.ibsrv.net/gimg/www.off...4f65a9b95b.jpg https://cimg6.ibsrv.net/gimg/www.off...4b93fe502c.jpg https://cimg7.ibsrv.net/gimg/www.off...afcd639492.jpg https://cimg6.ibsrv.net/gimg/www.off...c838df9907.jpg https://cimg7.ibsrv.net/gimg/www.off...587e341fab.jpg I i put 2 plates on the inside of the box to support it,spread out the weight.2 bolts ,its been there since 2003 |
Originally Posted by Strip Poker 388
(Post 4691537)
https://cimg3.ibsrv.net/gimg/www.off...25d20bb8d5.jpg
https://cimg5.ibsrv.net/gimg/www.off...bb1652370b.jpg https://cimg4.ibsrv.net/gimg/www.off...4f65a9b95b.jpg https://cimg6.ibsrv.net/gimg/www.off...4b93fe502c.jpg https://cimg7.ibsrv.net/gimg/www.off...afcd639492.jpg https://cimg6.ibsrv.net/gimg/www.off...c838df9907.jpg https://cimg7.ibsrv.net/gimg/www.off...587e341fab.jpg I i put 2 plates on the inside of the box to support it,spread out the weight.2 bolts ,its been there since 2003 https://cimg3.ibsrv.net/gimg/www.off...2cb91dabe2.jpg |
Originally Posted by PremierPOWER
(Post 4692862)
What boxes are those? I mounted mine in the exact same spot, but mine are side opening and one of them leaks anytime it gets into the water. I want to swap them both for top opening boxes like that. https://cimg3.ibsrv.net/gimg/www.off...2cb91dabe2.jpg |
I've only found a few searching around under ' Boat trailer bow steps '
Here is one: https://www.easystepsystem.com/ |
Originally Posted by SB
(Post 4692936)
I've only found a few searching around under ' Boat trailer bow steps '
Here is one: https://www.easystepsystem.com/ https://cimg5.ibsrv.net/gimg/www.off...14567fb1e6.jpg https://cimg3.ibsrv.net/gimg/www.off...ce9e54fbc0.jpg https://cimg4.ibsrv.net/gimg/www.off...6cf3c36959.jpg https://cimg7.ibsrv.net/gimg/www.off...6bce26a3e1.jpg |
That Sport trail one looks cool. :)
Years ago, on OSO, I saw a pic of a ladder attached to the swing arm of the outdrive guard part of trailer. I thought that was cool if someone has this type of trailer.. |
| All times are GMT -5. The time now is 11:41 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.