That thread is one of the top 10 best threads ever posted here.

I am truly humbled by all the kind words about my build. Thanks Tom and Indy! As for set up, I still don’t have much input, I am still running some random OMC prop pulled from a buddies barn. It got my RPMs in range and got me to 56mph. I am bummed with the performance but have had no time to do anything about it = 3 kids. I am hoping this spring to tow up to B-Blades and try a bunch out. I would love to go with a bigger engine but the 200hp is healthy and running. I can’t see spending more cheese as I will want to someday get a bigger boat. I will keep running it til it pukes... Good luck on your quest. They are not the fastest 21’s but do ride good. I was out on Erie coming back in 3 to 4’s and we got thru it, kids actually fell asleep. I was a little, ready to get docked, but the boat ran thru it still on plane ;)

Antti,
post some pics of your new boat!

You should be humbled! Lot of work and effort you have put on it and it is nice...very nice! =) Well i am quite satisyed to speed and like the way it handles but let´s see if can get the +60mph with this old -88 225 Johnson. I like it when you can go wot and it is perfect still to handle and ofcourse in rough conditions...that´s the main thing to me. And need to remember there is always someone who is faster unless on nice weather unless you spend whole lot a money. ;) I will post when my 10 messages are accomplished! =)

thanks for the kind words. I definitely agree. The boat runs great in the chop and even when it gets bigger. As for speed, I was kind of downing it but, with a family of 3 all below 8yrs old I am ok with it. It’s great to run faster than most and have confidence on how it performs. Heck, I put the oldest on the sticks and my middle kid sitting on my lap stearing and have a blast. Yes I have a hand on both, steering and throttle but it’s great letting them feel the fun!

Did you get your ten posts in yet? I wanna see some pics of this boat already :)

Not yet, on my count now i have couple more messages left =D I try to go and talk **** in the forum.
Definetly it´s great that they feel the fun also....and get to boats from very young and learn to drive. Hey what kind of prop you are using?
Question for everybody here!? Is it worth to put trim tabs to Apache with long bracket?? I have smart tabs on my little boat about 15-16feet with 115hp and they work perfect on that...there is no bracket and it is light as hell only 250-300kg.

If you want to go fast in rough water, I always recommend trim tabs. In this case they're not needed to get the boat on plane. What they are needed for is controlling the attitude (and thus altitude) of the boat in flight. Properly selected and installed, a good set of tabs will effectively lengthen the hull running surface by the length of the tab. And since the tab is the last thing water sees as it rushes under your hull, the tabs can effectively "trip" the bow back down coming off a big wave as opposed to having it "reach for the sky." Just my 2 cents.

Yes i do want to go fast in rough waters and having quite safe performance in rough waters. Your 2 cents was a very good 2 cents.....any recmmendation from tabs?

https://cimg6.ibsrv.net/gimg/www.off...ef79ad022e.jpg
NOW 10 is completed! Here is when i bought it. Now doing some cleaning and upgrades during winter..

Easiest to install are probably Lencos. Some folks will tell you that nothing less than K-Planes will work and survive. I've had a set of 12x12 Boat Levelers on mine since 1996 with zero issues. And I run the boat pretty hard on Lake Ontario.