1978 Baron info on hull no.
The following users liked this post:
tommymonza (07-21-2020)
#23
Registered
Some old pics of my brother during the Plug building years . The 1st plug was made out of cedar and kept moving from drying out so Dave pulled a fiberglass mold off from it when he got it as good as he could.
He than built a fiberglass plug out of that mold and that plug got the strakes built and the plug perfected before pulling the final production mold.
1pic is the original wood plug the other 2 are of the fiberglass plug.
Last edited by tommymonza; 07-21-2020 at 04:01 PM.
The following users liked this post:
larslindroth (07-27-2020)
#25
Registered
Thread Starter
I'll have to take some more pics if it. Overall, for being 42 yrs old....it's in good shape. It has a red eagle trailer. Long covered bunks. Fits good. The lower transom looks like it was painted white. There was over spray all over the prop. I cleaned it and gained 3 mph. Lol. 2-stepped the teak platform and side steps. Still need to oil them. Has some bow rash from beaching. I can spray gelcoat so... No big deal. Bottom is good. The topsides has a crack about 5 inches long but not a big deal. Cosmetic. Not structural. The outdrive paint is super thick. Hard to remove by stripper or other. Grinding sounds easier.
The following users liked this post:
tommymonza (07-21-2020)
#26
Registered
Thread Starter
I want that snoopy back on there.thats cool. I love it. I think I've heard if this before with that name. Yrs ago. Didn't know it was a Baron. I wonder where I could get that made.
The following users liked this post:
tommymonza (07-21-2020)
#27
Registered
My brother had told me it had been redone when saw it back in the late 90s.
Yours still has the original Merc shifter. Your was the only one built with that shifter all the other had the Morse shifter.
Yours still has the original Merc shifter. Your was the only one built with that shifter all the other had the Morse shifter.
#28
Registered
Just a wealth of useless information.
Tom I knew Tommy would have some good info for you, give him a day or two & who knows what he will dig up.Tommy, Sheri miss's you, me not so much. LOL. Talk soon brother.
Todd
Tom I knew Tommy would have some good info for you, give him a day or two & who knows what he will dig up.Tommy, Sheri miss's you, me not so much. LOL. Talk soon brother.
Todd
The following 2 users liked this post by baronmarine:
larslindroth (07-27-2020), tommymonza (07-21-2020)
The following 3 users liked this post by tommymonza:
#30
Registered
Thread Starter
I want that snoopy back on there.thats cool. I think I've heard of this before with that name. Yrs ago. Didn't know it was a Baron. I wonder where I could get that made.