Lets talk about Raylar
#12
Thread Starter
Registered
Joined: Jul 2013
Posts: 76
Likes: 9
#13
Registered

Joined: Oct 2012
Posts: 2,240
Likes: 541
#16
I had a 2003 496 HO with a complete raylar package installed. The stock motor was swapped at 50 hrs in 2003 with the raylar 496. When this swap was done you do a exchange with raylar for a complete ready to drop in package. The boat is still around on our lake a running as good as ever. Just routine maintenance done every year on it. It's around 700ish hrs on it last time I saw the owner.
#17
Gold Member

Joined: Jul 2008
Posts: 3,748
Likes: 869
From: Delray Beach, FL
1. If the boat is still available in this market there might be something wrong with it.
2. I have a set of them, they run very well. Once the original owner replaced everything (specifically forged pistons) they have very similar characteristics as Mercury 525's - they way they run are very reliable assuming the company who built them did it correctly. The cam is basically the same as the 525 and it yields roughly the same power and torque as well as the way they sound.
2. I have a set of them, they run very well. Once the original owner replaced everything (specifically forged pistons) they have very similar characteristics as Mercury 525's - they way they run are very reliable assuming the company who built them did it correctly. The cam is basically the same as the 525 and it yields roughly the same power and torque as well as the way they sound.




