![]() |
Originally Posted by phragle
(Post 4827147)
If you knew a 1/40000 of what Rob knows about boats, you wouldnt be asking these questions..... Be carefull you dont go over the edge while you boat on the flat earth.
|
Originally Posted by IGetWet
(Post 4827120)
I believe, that it’s possible, that Dar, or a disciple of dar,
|
i knew it, he is Race Bannon! good evening Dr. Quest!
https://cimg4.ibsrv.net/gimg/www.off...7677695638.jpg |
Originally Posted by offshoredrillin
(Post 4827158)
i knew it, he is Race Bannon! good evening Dr. Quest!
https://cimg4.ibsrv.net/gimg/www.off...7677695638.jpg |
The thread that keeps giving. :lolhit:
Thanks for the miles of smiles everyone. Almost here….just 2-3 months and boating season. |
I like it and want one!
Originally Posted by offshoredrillin
(Post 4827158)
i knew it, he is Race Bannon! good evening Dr. Quest!
https://cimg4.ibsrv.net/gimg/www.off...7677695638.jpg |
Originally Posted by Prestigeworldwideee
(Post 4827159)
I like a bigger boat than that, it’s kinda small but at least I’ll be able to take your mother out in it.
|
I normally don't participate in negative input, but in this case I am willing to make an exception.
At the beginning I genuinely believed the OP was looking for help with his poorly designed and set up boat. I was incorrect with that assumption, he just wanted validation with his preexisting plan to install an oversized cavitation plate (not a Hydrofoil, as indicated by the title). Thank you SB for the example of a hydrofoil! I say go cat go! Install the Doel-fin or whatever brand you have already purchased, and when it creates so much stern lift, you spin out, and from the extra load on the cav plate it breaks the mounting points clean from the drive. Please don't have anyone else with you at the time of your test run. I am honored to have participated in a dialogue with a future Darwin Award recipient. |
|
Originally Posted by resurrected
(Post 4827188)
I normally don't participate in negative input, but in this case I am willing to make an exception.
At the beginning I genuinely believed the OP was looking for help with his poorly designed and set up boat. I was incorrect with that assumption, he just wanted validation with his preexisting plan to install an oversized cavitation plate (not a Hydrofoil, as indicated by the title). Thank you SB for the example of a hydrofoil! I say go cat go! Install the Doel-fin or whatever brand you have already purchased, and when it creates so much stern lift, you spin out, and from the extra load on the cav plate it breaks the mounting points clean from the drive. Please don't have anyone else with you at the time of your test run. I am honored to have participated in a dialogue with a future Darwin Award recipient. |
| All times are GMT -5. The time now is 01:26 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.