HP 500 EFI Starter
#2
VIP Member
VIP Member
Which engine, port or starboard?
(I'm assuming there side by side,
not staggered)
If it's the port, you will most likely
have to remove the r.h. header, to
gain enough access.
Starboard, depends on engine room
layout, some times you can fish it out
without removing the header.
Like jeff has said, hope it's not a ring
gear problem, engine must come out.
hope this helps.
jt
(I'm assuming there side by side,
not staggered)
If it's the port, you will most likely
have to remove the r.h. header, to
gain enough access.
Starboard, depends on engine room
layout, some times you can fish it out
without removing the header.
Like jeff has said, hope it's not a ring
gear problem, engine must come out.
hope this helps.
jt
Thread
Thread Starter
Forum
Replies
Last Post
tcm07
General Boating Discussion
20
10-03-2008 02:00 PM