OffshoreDreamer,

It's been done. It's underwhelming. Could be that nobody has ever done it with one of these serious racing boats. The problem is that the CG and aerodynamics of these boats are fairly critical, and a GoPro messes with both pretty bad.

Thanks. Brad.

Helmhurst,

I'm one eye from blind, having lost my left eye to a retinal blastoma when I was 4yo. I have no binocular vision, and, therefore, no depth perception. This is why I've always stuck to 2-dimensional RC stuff, specifically the boats. And even then, the end of the back stretch, entering into what NASCAR would call turn 3, has always been a challenge for me. Most guys I raced against regularly learned when they could pass me on the inside if they could, because I was bad for overshooting the turn. A high vantage point driver's stand really helped. I've stood on 5gal buckets on many occasions.

It's actually surprising how well these boats behave. The hardest thing to teach newer drivers is to actually squeeze the trigger and load the turn fin. They don't really like to turn at slower speeds. The outriggers, anyhow, which is all I've ever driven consistently. Once you've got them dialed in and set up right, they go pretty much exactly where you tell them to. Sometimes, this is the actual problem, though. The other thing is to get them to take rudder throw OUT of their steering. The rudders on the boats in the videos are only turning about 5° or so to make these turns. It's nutz how hard they turn with so little rudder deflection.

Thanks. Brad.

What is POV angle???>?>?>?>?>

Alfred,

A GoPro camera mounted on the boat for a 1st person perspective of the boat running.

Thanks. Brad.

, Oh you mean like this? Its a 40 inch dumas scarab that I converted to center console

Awesome models in this thread, I keep thinking about getting one to scratch that itch but man I don't need another hobby!

This R/C CC is just freakin' unbelievably full-scale looking. For a video shot 9 years ago, the footage is exceptional.