Eickert exhaust manifold problems - Volvo/Innovation engines?
#1
Diamond Member #001
Charter Member
Thread Starter
iTrader: (2)
Join Date: Oct 2000
Location: Coastal North Carolina
Posts: 4,808
Likes: 0
Received 5 Likes
on
4 Posts
Eickert exhaust manifold problems - Volvo/Innovation engines?
Has anyone experienced any issues with overheating and cracking Keith Eickert Power Products cast exhaust headers/manifolds, particularly on Volvo Penta (or Innovation) close-cooled engines? I keep having problems with the manifolds on the right banks of my 600’s, and I am beginning to suspect that there is some sort of inherent cooling water flow problem at work here - it’s happened on both port and starboard engines, but always the right bank - never the left. My engines are in a 38 Formula for what that’s worth….
__________________
Retired! Boating full-time now.
Retired! Boating full-time now.
#2
Charter Member
Charter Member
C_Spray,
I have KE's on my HP500 and 4 + years in salt water with no problems, (Sound of knocking on wood in back ground)! And I have noticed that my RH Header runs a little warmer than the LH Header. Is there anybody at Volvo, that you can talk to about this?
Good luck,
MD
I have KE's on my HP500 and 4 + years in salt water with no problems, (Sound of knocking on wood in back ground)! And I have noticed that my RH Header runs a little warmer than the LH Header. Is there anybody at Volvo, that you can talk to about this?
Good luck,
MD
__________________
Everything is for sale @ a certain $$
Everything is for sale @ a certain $$
#3
Diamond Member #001
Charter Member
Thread Starter
iTrader: (2)
Join Date: Oct 2000
Location: Coastal North Carolina
Posts: 4,808
Likes: 0
Received 5 Likes
on
4 Posts
Originally posted by Dean Ferry
... Is there anybody at Volvo, that you can talk to about this?...
... Is there anybody at Volvo, that you can talk to about this?...
__________________
Retired! Boating full-time now.
Retired! Boating full-time now.
#4
Registered
C Spray I cracked mine one the top of the elbow. It became clogged and over heated. Also one side did run a little hotter than the other.
#6
#7
Moderator
Gold Member
A friend of mine runs twin innovation(volvo) 600's in his scarab... Stellings headers though and no issues... I would call innovation directly and see if they have heard of this issue.
#8
Charter Member #40
Charter Member
For what it's worth, I have KE's on 825 blower app. and no problems. A friend has them on 1100's and no problems. But I am not closed cooling.
#9
Diamond Member #001
Charter Member
Thread Starter
iTrader: (2)
Join Date: Oct 2000
Location: Coastal North Carolina
Posts: 4,808
Likes: 0
Received 5 Likes
on
4 Posts
Bob - Is your boat at Tome's Landing? I'm in the dry stack there - all-white 38' Formula on the bottom rack in the East building.
__________________
Retired! Boating full-time now.
Retired! Boating full-time now.
#10
AT Cult Member #3
VIP Member
I'll take this one Bob. Chuck, yes it is in the marina in front of the condos on a hydro hoist. BAD ASS boat, was fast as $hit last year with the other motors now its "Off the Hook!!!"