Bravo won't go into reverse?
#1
Guest
Posts: n/a
Bravo won't go into reverse?
I have a foot throttle with a shifter where a normal throttle would be. THe boat had a cheesy quiksilver shifter on it but that was falling apart when I bought the boat and Finally broke putting it into reverse. No I just have a anodized shifter from teague. THe boat was always hard to get into reverse but this year I can harldy get it to go in at all. I have to work the **** out of to get it to go and usually takes a few minutes. This makes docking a ***** and could be dangerous. What the heck?
#2
Charter Member #30
Charter Member
You will probably find that the part that attaches to the shift fork will have an oblonged hole. The replacement is made out of a better metal that should not do this, an easy fix. To confirm try shiffting the drive with the cable that goes right to the drive from the shiffting bracket I would guess it will shift in and out with no problem. There are other things it could be but I bet it is this I had the exact same thing happen. Sorry I don't have part numbers or the right names
__________________
I have Steps & Bubbles!
I have Steps & Bubbles!