Rare part needed! (OSO please don't move)
#21
Platinum Member
Platinum Member
Originally posted by puder
glh my boat is a 1987 26' scarab excel. I have no idea what the wellcraft part number is.
glh my boat is a 1987 26' scarab excel. I have no idea what the wellcraft part number is.
Wellcraft Marine Corp.
1651 Whitfield Avenue
Sarasota, FL 34243
Phone: (941) 753-7811
Ask for costumer service. Also check on your side glasses or anywhere on the windshield assembly for names or if there are markings with Company names or something of that nature. That would help to find the original Manufacturer.
My bet is they are now owned by taylor Made!!!
#23
speel chekk this fokker!
Charter Member
Thread Starter
Join Date: Feb 2001
Location: Locust Valley, New York
Posts: 5,329
Likes: 0
Received 0 Likes
on
0 Posts
katapult welcome. I already called that guy and he quoted me at least $2k.
__________________
Pardon me, while I whip this out!
Pardon me, while I whip this out!
#24
Guest
Posts: n/a
Puder, I had the exact same boat sold it 3 weks ago. I don't know how tall you are I'm 6', the thing that always bothered me on mine was that the damned thing was a little too high, either sitting I had to lokk through it bent down a little or sit on my foot and stretch a little I was going to shorten it to about 6" to make it look a little sleeker. I think plexiglass might crack too easy you might be better off with Lexan.
#25
speel chekk this fokker!
Charter Member
Thread Starter
Join Date: Feb 2001
Location: Locust Valley, New York
Posts: 5,329
Likes: 0
Received 0 Likes
on
0 Posts
i used to have teh hieght problem with it BUT i replaced the entire interior so it shouldn't be an issue anymore. The new drop down bolsters (in seat mode) are taller than the origonal seat so eye level shgodul be just above the railing.
__________________
Pardon me, while I whip this out!
Pardon me, while I whip this out!