simulated diamond plate??
12-08-2003 | 07:42 PM
#13
Thread Starter
Charter Member #655
Joined: Dec 2000
Posts: 4,939
Likes: 1
From: Holland, Michigan
Payton for real???C_spray those are the cabinets that gave me the idea!!but there way to small I want them deeper like 24".....
__________________
If your boat has a sail do you ride a horse to the ramp?
If your boat has a sail do you ride a horse to the ramp?
12-08-2003 | 07:44 PM
#14
Thread Starter
Charter Member #655
Joined: Dec 2000
Posts: 4,939
Likes: 1
From: Holland, Michigan
Originally posted by NASTY HABIT
Where are you ? I have quite a bit I could spare some ...or you can usually get a 12ft by 4ft sheet for under $100.00 ...i paid 75.00 a sheet last time I bought it.
Where are you ? I have quite a bit I could spare some ...or you can usually get a 12ft by 4ft sheet for under $100.00 ...i paid 75.00 a sheet last time I bought it.
12-08-2003 | 09:19 PM
#16
Registered
Joined: Feb 2002
Posts: 1,956
Likes: 0
From: Orlando
Originally posted by dyno
I'm in Michigan whats the name of the stuff you used??I think I'd rather have something ridged that I can cut on a table saw.....
I'm in Michigan whats the name of the stuff you used??I think I'd rather have something ridged that I can cut on a table saw.....
12-08-2003 | 09:42 PM
#17
Platinum Member
Joined: Feb 2001
Posts: 2,123
Likes: 1
From: Manahawkin, NJ
Go to a place that can order you Formica and ask to see the samples. My buddy is a carpenter and did the top of his bar in the diamond plate patterned stuff - came out pretty cool.
He ordered it from the same place he gets all his other Form
He ordered it from the same place he gets all his other Form
12-09-2003 | 08:24 AM
#20
Official OSO boat whore
Joined: Oct 2000
Posts: 6,157
Likes: 0
From: Mequon, WI
The loneseal is a rubber product meant for a floor application. It's a pearescent material and is quite pricy. For cabinet faces, I'd recommend a high pressure laminate. Yes, the old formica is available in a diamond plate pattern with a metallic finish.
http://www.advtechnology.com/numetal...singc/GEK.html
http://www.advtechnology.com/numetal...singc/GEK.html
