Busted
#13
Charter Mod
Charter Member
Thread Starter
Originally posted by lucky strike
Cigracer-
Ehh...move to Florida...
LS JR.
Cigracer-
Ehh...move to Florida...
LS JR.
Its fixed now. I wrapped the new one in insulated tape and pipe insulation. I also got one of those boxes that covers it up. Fingers are crossed.
You are right Cord. I need to have the city install a meter. That just shot up to the top of things I need to do.
#14
Registered
Join Date: Aug 2003
Location: Boston, Ma
Posts: 1,481
Likes: 0
Received 0 Likes
on
0 Posts
I know in boston it costs about 450 to have it done but it can save hundreds on your water/sewer bill. The insulation will help, but if you have time get the heat wrap and plug it into an extension cord.
#15
OffshoreOnly Antagonizer
VIP Member
Join Date: Mar 2002
Location: Bethesda, Maryland
Posts: 865
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by lucy
tough break. the plumber has to eat too.
tough break. the plumber has to eat too.
__________________
"Kevin, prepare for the summer."
-Mr. Sorkin, 10th Grade Geometry teacher
"Kevin, prepare for the summer."
-Mr. Sorkin, 10th Grade Geometry teacher
#16
Official OSO boat whore
Charter Member
iTrader: (2)
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
If at all possible, look into recessing the valve below ground. It'll be out of sight, away from the lawn mower or any errant kids and will be a touch warmer. From what I can see, the plumber would only need to desolder 2 fittings and shorten the pipes. Time=15-30 minutes.