Dead 496HO fixed.
07-16-2004 | 10:16 AM
#12
Thread Starter
Registered
Joined: Dec 2000
Posts: 916
Likes: 1
From: Solomons Island, Md
Re: Dead 496HO fixed.
I dont' have the breakdown yet of that $515.00 but it's entirely possible this could have been an easy fix for me if I had a scan tool. I almost bought one a few months ago.
07-16-2004 | 08:24 PM
#13
Thread Starter
Registered
Joined: Dec 2000
Posts: 916
Likes: 1
From: Solomons Island, Md
Re: Dead 496HO fixed.
According to the guy who fixed it – scan tool first showed “engine will not start”. No $hit!!!
The scan tool then walked him through the entire electrical harness until it revealed the fault. Prior to “Smart Craft” that particular failure would not have left me high-and-dry. Who the f$#k needs “Smart Craft”?
The scan tool then walked him through the entire electrical harness until it revealed the fault. Prior to “Smart Craft” that particular failure would not have left me high-and-dry. Who the f$#k needs “Smart Craft”?
07-16-2004 | 10:04 PM
#14
VIP Member
Joined: Mar 2002
Posts: 3,514
Likes: 4
From: Vestal/Binghamton NY
Re: Dead 496HO fixed.
Last edited by wwwTOPDJcom; 07-16-2004 at 10:10 PM.
07-17-2004 | 10:38 AM
#15
Thread Starter
Registered
Joined: Dec 2000
Posts: 916
Likes: 1
From: Solomons Island, Md
Re: Dead 496HO fixed.
Originally Posted by wwwTOPDJcom
