L.I. Engine Builders??
#12
Registered

Joined: Oct 2000
Posts: 3,045
Likes: 3
From: N. NJ, Eastern LI
Definatly go with Falcon. I was out there yesterday bringing them my new exhaust and I spent alot of time talking to Joe, their main engine builder. Super nice guy and his main goal is solid power with reliability. They keep a fairly low profile but do a great job taking care of customers and their boats. They work on boats like the OL pictured above with a pair of 1300hp motors, and others with stock power. I'm sure they will have no problem building whatever you want. 631-723-0794
#14
falcon, MRD and zul if you want to spend big $. Falcon might not be as much $$$ as the others.
I think Full Throttle and tom would biuld you a damn good engine and not charge you insane money.
If i needed a new engien i'd probably go with tom.
I think Full Throttle and tom would biuld you a damn good engine and not charge you insane money.
If i needed a new engien i'd probably go with tom.
__________________
Pardon me, while I whip this out!
Pardon me, while I whip this out!
#17
use the volvo flywheel housing cover from your current BB, I had to get a new Merc one because the motor I bought has a volvo one on it , Chris Martin may still have the one we pulled off mine. BTW 425hp will put that in the 70 range
personally I wouldnt want too much more HP , remember its a STEPPED HULL
Opps thats another thread
personally I wouldnt want too much more HP , remember its a STEPPED HULL
Opps thats another thread
Last edited by wwwTOPDJcom; 08-25-2004 at 12:05 PM.
#19
Thread Starter
Registered
Joined: Sep 2002
Posts: 1,943
Likes: 0
From: Manhasset, NY
Thanx for the recomendations guys..looks like I have a little bit of homework ahead of me before I decide on what to do and who to let do it. I will keep you guys posted...
#20
Johnny,
I am presently building a 540. I am doing it myself, but I got the short block kit ( block, crank, rods, pistons, rings and bearings ) from Scott Schafiroff. He had the best deals by far for the parts. Give them a call, ask for Vinny B. Tell him Vinny P. with the 540 gave you his number. 631-218-7530..
I am presently building a 540. I am doing it myself, but I got the short block kit ( block, crank, rods, pistons, rings and bearings ) from Scott Schafiroff. He had the best deals by far for the parts. Give them a call, ask for Vinny B. Tell him Vinny P. with the 540 gave you his number. 631-218-7530..



