![]() |
Re: where are the active thunder guys
no i dont but it is really simple to build. we just made a receiver cup for the pole to fit in
& welded it to a plate that gets thru bolted to the the floor area that extends into the engine compartment. it's alot easier if you have twin hatches that open in the middle like my older cig. i just trimmed the hatches under the vinlyl & you can't tell when the poles not up. |
Re: where are the active thunder guys
I just happen to have butterfly hatches :D I have been thinking about it for a while. how does it hold when being used :D
|
Re: where are the active thunder guys
Originally Posted by Sydwayz
SUP!?!? You wanna piece of me? :D :D :evilb: :evilb:
|
Re: where are the active thunder guys
Originally Posted by JCPERF
No takers?
|
Re: where are the active thunder guys
Originally Posted by ActiveThunder
...And don't even touch the length of time it takes me to return phone calls.....
I realize most of this smack has been all in fun, but after reading some of the lip service from some of these guys, I wouldn't be afraid to put the lil ole 25 Thunder up against some of your so called "big dawgs" out there. And I'll even leave the padded hatch on the back and the cooler of goodies in the cabin. ;) |
Re: where are the active thunder guys
1 Attachment(s)
Ok if this get's out of hand I'll send my 4yr old to kick some a** he can bring it!!
|
Re: where are the active thunder guys
1 Attachment(s)
One more
|
Re: where are the active thunder guys
Pat, do you remember the boat??? All I can say is I think the 32 is one kick a** boat when the time is right I'll move up and it will to be an A/t also!! :D :D
|
Re: where are the active thunder guys
Originally Posted by tomtbone1993
I just happen to have butterfly hatches :D I have been thinking about it for a while. how does it hold when being used :D
so it can't pull up.it creates quite a stir at poker runs & parties!!! |
Re: where are the active thunder guys
Originally Posted by vette131
its very stable. we built a plate with a hole in it that is through bolted to the cross brace that the hatches rest on when closed. it also has a pin that secures it to the bottom cup
so it can't pull up.it creates quite a stir at poker runs & parties!!! if you get a chance I would like to see a picture. My problem would be my drive shaft and my third motor being in the way :rolleyes: |
| All times are GMT -5. The time now is 04:20 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.