38' CAT up in smoke
01-23-2005 | 08:43 AM
#21
VIP Member
Joined: Feb 2004
Posts: 12,314
Likes: 1,556
From: Maryland
Re: 38' CAT up in smoke
Sorry for your loss's Doug, best wishes on a fast recovery from it. These are the times where you want to look at the people that look at us business owners and say..."Must be nice".
01-23-2005 | 09:41 PM
#23
Registered
Joined: May 2002
Posts: 3,600
Likes: 8
From: Fort Lauderdale
Re: 38' CAT up in smoke
Originally Posted by Doug Wright
Amazingly enough Dale convinced me to look closely at the mold before I **** canned it. He was right only the outside skin was damage. It appears that the mold might still be salvageable. The fire was put out so quickly that the heat might not have penetrated below the SprayCore we use as a print barrier. We'll know more about it within the next week after we replace the outer layers & attach the steel bracing so we can pull it off the plug.
Thread
Thread Starter
Forum
Replies
Last Post
Tim G.
General Boating Discussion
2
12-15-2003 07:25 PM
