CMI tailpipe questions
04-24-2005 | 11:56 PM
#1
Thread Starter
Registered
Joined: Apr 2004
Posts: 48
Likes: 0
CMI tailpipe questions
OK. I probably messed up again.
I purchased a set of Corsa Captains call exhaust for my CMI elbow top headers. I got them off Ebay and they were supposed to be off 500 HP. 2 things do not match up.
1. Flange is different then the straight tailpipes that where on my original exhaust.
2. Center to center distance on the tailpipe is 3" higher on the Corsa tailpipes.
Overall center to center on originals is about 5 inches and on the Corsa's it is about 2 inches.
If CMI built the 500 HP exhaust is it completly different then a stock big block set of CMI elbow tops?
Any professional advice out there?
I purchased a set of Corsa Captains call exhaust for my CMI elbow top headers. I got them off Ebay and they were supposed to be off 500 HP. 2 things do not match up.
1. Flange is different then the straight tailpipes that where on my original exhaust.
2. Center to center distance on the tailpipe is 3" higher on the Corsa tailpipes.
Overall center to center on originals is about 5 inches and on the Corsa's it is about 2 inches.
If CMI built the 500 HP exhaust is it completly different then a stock big block set of CMI elbow tops?
Any professional advice out there?
Last edited by revomaniac; 04-25-2005 at 08:31 AM.
04-25-2005 | 12:06 PM
#2
Rob
Joined: Aug 2001
Posts: 21,637
Likes: 12
From: Ms
Re: CMI tailpipe questions
Try to Ck with the board before you buy next time .theres plenty of people that will give ya advice here.
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
Thread
Thread Starter
Forum
Replies
Last Post
25 hors la loi
General Boating Discussion
12
10-15-2007 08:46 AM
