measuring "standard Bravo exits"
04-27-2005 | 02:55 PM
#1
Thread Starter
Charter Member #655
Joined: Dec 2000
Posts: 4,939
Likes: 1
From: Holland, Michigan
measuring "standard Bravo exits"
how can I measure the exit holes in my transom? I'm going to dry stacks on my EMI manifolds and they make a set for "standard Bravo exits" I had a Merc silent choice set up in my boat....any ideas if thats a standard Bravo exit?
Thanks
Don
Thanks
Don
__________________
If your boat has a sail do you ride a horse to the ramp?
If your boat has a sail do you ride a horse to the ramp?
04-27-2005 | 05:41 PM
#2
Registered
Joined: Oct 2004
Posts: 1,358
Likes: 2
Re: measuring "standard Bravo exits"
Ask your Merc dealer for a copy of the tru transom exhuast template that comes with merc tips. You cut it out arounf the transom plate and then see if they line up. I doubt they will though. I have installed about 50 sets in my life and only 1 has only worked according to the template.
04-28-2005 | 03:58 AM
#3
Registered
Joined: Jun 2004
Posts: 334
Likes: 1
From: Md
Thread
Thread Starter
Forum
Replies
Last Post
Ben@SRP
Trucks, Trailers and Transportation
14
10-13-2006 09:11 AM
mikesufka
General Boating Discussion
8
12-26-2002 11:23 AM
