Re: Roller lifters input
 

So far so good on a twin pro charged engine with 100hrs on them.

Chris

Re: Roller lifters input
 

That is good to hear! Sounds like hydraulic roller technology is progressing nicely!

Re: Roller lifters input
 

3rd generation will be out late this fall.

Chris

Re: Roller lifters input
 

I didn't have good luck with the Crower Groove Lock solid lifters, I haven't had had any problems with the Crower Severe Duty 66291 w/ hppo option, again solid roller. Sorry for the confusion.
What model DCB do you have?

Re: Roller lifters input
 

Chris
Just to clarify are you talking about the morel lifters??? Lifters and p/rods are the last thing I need to pick up to finish my 502 project and I'm leaning toward morels if I can find them at a decent price. (hyd-rollers) Lift is high 5,s with a pro charger...... Also Scott,(cfm) suggested I ask you for a good machine shop in so. calif ?? Thankyou
Jere

Re: Roller lifters input
 

Thanks for clearing that up.Looks like I'm gonna go with a .903 lifter from Jesel or Crower Severe Duty's.

It's a Mach26.

Re: Roller lifters input
 

jere,
You can call me or e-mail me and I will give you some suggestions.
423 854 0007 Office
[email protected]

Chris

Re: Roller lifters input
 

The Mach 26 is a very nice boat, they can handle the speed.

Re: Roller lifters input
 

I have no worries about the boat,its me that hasnt been that fast behind the wheel before. LOL Im excited to see how this thing will excellerate thats for sure.

Re: Roller lifters input
 

Just a thought here.. the solid rollers.. it was mentioned they can handle 6-8k rpm.. but how do they handle 600 rpm for all the no wake zones? I think that is where my problem exsists.. low rpm, at least that is what I have been told.. :eek: :eek: